How to Replace Master Power Window Switch 2000-07 Toyota Highlander
Created on: 2018-03-13
How to repair, install, fix, change or replace a damaged, worn out, faulty or shorted power window switchon rhe 04 Toyota Highlander.
-
step 1 :Removing the Master Window Switch
- Pry up the master window switch with a trim tool
- Disconnect the wiring harness
- Remove the switch
- Remove the Phillips screws from the trim
- Pry the trim off of the master window switch
-
step 2 :Installing the Master Window Switch
- Tighten the Phillips screws to the trim
- Connect the wiring harness to the master window switch
- Press the master window switch into the door panel
Tools needed
-
Flat Blade Screwdriver
Phillips Head Screwdriver
Hi, I’m Mike from 1A Auto. We’ve been selling auto parts for over 30 years!
Open the door. To remove the master window switch we're going to use the plastic trim tool. You can get these from 1AAuto.com. Otherwise, you'd have to use a flat bladed screwdriver, and you could damage your trim with the hard metal. These are nice, soft plastic, and then kind of get underneath here, it's a little tight fit, and kind of slide it to the middle. There's a clip, we're going to push in this way, and at the same time pry up to pull the master window switch out of the door panel. Put this aside here. Now you can unlock the connector. There’s a tab here, push down and pull out on the switch to pull it out.
To remove the master window switch from this trim, flip it over. There's three Phillips head screws. I'll take those out. Lift it out of the plastic. Unclip it. Unclip it both sides. If need be, use a small flat bladed screwdriver. It's going to pop in and it's going to clip into the other side. Try to hold that down and clip this out and push it out at the same time.
Reinstall our master window switch. Place it right into the trim. It's got two tabs on both sides. They're going to snap and lock into place. Reinstall the three Phillips head screws. They're just going into plastic, so don't over tighten them. Just get tight. Just stop. Do the same for all three of them. Ready to go back in the car. Load the harness back in. It'll click when it locks in place. There's a tab here. It's going to slide underneath, and this metal tab's going to push into this opening here.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
How to Fix Dents Deep Scratches On Your Car
Check out this video if you want to learn how to do your own patching and painting! This tutorial will help you repair those deep dents and scratches!
