How to Replace Master Power Window Switch 1998-2004 Nissan Frontier
Created on: 2013-10-16
How to repair, install, fix, change or replace a damaged, worn out, faulty or shorted power window switch on Nissan Frontier, model years 98, 99, 00, 01, 02, 03, and 04.
-
step 1 :Removing the Switch Panel
- Remove the Phillips head screw inside the door pull
- Lift off the rear of the arm rest
- Pry up the window switch panel by hand
- Disconnect the window switch wiring harnesses
-
step 2 :Removing the Switch
- Remove the four screws holding the switch to the panel
- Pull the switch out of the panel
-
step 3 :Installing the Switch
- Insert the switch into the panel
- Insert and tighten the four Phillips screws to hold the switch to the panel
-
step 4 :Reinstalling the Switch Panel
- Connect the window switch wiring harnesses to the switch panel
- Push in the window switch panel
- Push in the rear arm rest
- Insert and tighten the Phillips head screw inside the door pull
Tools needed
-
Flat Blade Screwdriver
Phillips Head Screwdriver
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace the power window switch the front driver side, which is the four window switch with the lockout button, and it's a pretty easy procedure. This is a 2003 Frontier, pretty much the same for any 2001 to 2004. Only tool you'll need is a Phillips screwdriver.
There is a Phillips screw right down in the door pull here, and we'll remove that. Then just pull up on the armrest pad and it just pops right off, and then pull up on the front side of the panel first. Pull it out.
Then just disconnect the two harnesses. There are tabs on them. You may want to use a small screwdriver to help press the tabs in. You can see, just use your thumb, press the tab in, pull out the harness. Again like I said, you may want to use a screwdriver just to help you press the tabs in, and then there are four screws that hold the switch to that panel, pretty easy, and remove those four screws. We'll speed up as we do that.
On the left is the original switch. These can get wet and then it'd stop working. See the new switch from 1A Auto, it's exactly the same. Everything is going to plug in exactly the same. Okay, I'm just kind of speed through reinstallation. Back to the panel with the four screws, plug it in. Snap the panel down into place, and then put the screw in that holds the door pull in place, and then the armrest pad again.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
How to Replace Power Window Switch 2001-04 Chrysler Sebring
How to repair, install, fix, change or replace a damaged, worn out, faulty or shorted power window switch on 01, 02, 03, 04 Chrysler Sebring.
