1A Auto Video Library
Our how-to videos have helped repair over 100 million vehicles.
Enter Vehicle Year Make Model

Specify your vehicle's year, make and model to guarantee fit.

How to Replace Master Power Window Switch 2014-19 Chevy Silverado LT

Created on: 2016-07-28

How to repair, install, fix, change or replace a damaged, worn out, faulty or shorted power window switch on 15 Chevy Silverado

  1. step 1 :Removing the Window Switch
    • Pry off the door pull panel by hand
    • Remove the four 7mm bolts inside the door pull
    • Pry up the window switch panel
    • Disconnect the window switch wiring harness
    • Push the window switch out of the panel
  2. step 2 :Installing the Window Switch
    • Push the window switch into the switch panel
    • Connect the window switch wiring harness
    • Push the switch panel into place
    • Insert the 4 7mm bolts behind the door pull
    • Push on the door pull panel

Tools needed

  • 7mm Socket

    Ratchet

Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.

Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.

In this video, we're going to show you how to replace the master power window switch in this Chevy Silverado. This one's a 2015 LT. The only tools you'll need are a 7mm socket and ratchet and you might need a trim tool.

Open up the door. Then, you'll want to grab this panel firmly or you could use a trim tool and pull out and down. To get to your switches, you want to remove these four 7mm bolts. Then, rotate the panel up and pry out the bottom here a little bit. The panel comes up and then you can disconnect by pressing here and pull. Then, for the window switch, you just pry out on each one of these and push up on the switch at the same time. Pry out and then you see the window switch start to pop up. Keep pressure on it and it comes up and out.

This switch just goes right in, in reverse. Put it in, push it in, and make sure it's locked in. Reconnect the harness and then you feed the panel in. Go with the outside down in first and it locks into place. Replace your four screws. Just put this panel back in place at the top in first and lock it in.

Thanks for tuning in. We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.


Power Seat Not Moving How to Diagnose Power Seat Motors Switches and Wires

Andy shows you how to diagnose power seats that don't work, from the switches, to the motors!

Share on:
Go To Top

Same Day Shipping

Need your part faster? Choose expedited shipping at checkout.

Guaranteed To Fit

Highest quality, direct fit replacement auto parts enforced to the strictest product standards.

USA Customer Support

Exceeding customers' expectations, our team of passionate auto enthusiasts are here to help.

Instructional Video Library

Thousands of how-to auto repair videos to guide you step-by-step through your repair.