Menu

1A Auto Video Library
Our how-to videos have helped repair over 100 million vehicles.

How to Replace Master Power Window Switch 00-05 Chevy Impala

Share on:

How to Replace Master Power Window Switch 00-05 Chevy Impala

Created on: 2021-01-16

This video shows you how to replace the master power window switch in your 00-05 Chevy Impala. Watch to learn how with 1A Auto!

  1. step 1 :Remove the power window switch
    • Remove the two T27 Torx screws in the door pull
    • Pry up the panel in the door pull housing the switch.
    • Disconnect the wiring connectors from the switch panel.
    • Gently pry out the power window switch.
  2. step 2 :Install the new power window switch
    • Clip the power window switch into the door pull panel.
    • Connect the wiring harness.
    • Insert the door pull panel and power window switch back into the door panel.
    • Secure with the two T27 Torx screws.

Tools needed for replacement

  • Star Drivers & Sockets

    T27 Torx Driver

Installation Video
Watch video

Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the internet. Hi, I'm Mike Green. I'm one of the owners of 1A Auto. I want to help you save time and money repairing and maintaining your vehicle. I'm going to use my 20+ year's experience restoring and repairing cars and trucks like this, to show you the correct way to install parts from 1AAuto.com. The right parts installed correctly, that's going to save you time and money. Thank you and enjoy the video.

In this video we'll be showing you how to replace the driver's master-power-window switch. The only tool you'll need is a T27 Torx driver. This is on a 2001 Chevy Impala, same as any 2000 to 2005 Impala. There are two Torx screws here. Just trying to do all this in real time, not trying to bore you too much. Maybe you're replacing this because one of the switches isn't working for you, or the lockout's not working. It's a pretty easy process. Remove these screws; put them over here by handy magnetic tray.

My tools, also. All right. Then this just comes right up and out. Okay. Pull a little bit. Then all of these connectors, you just find where the lock goes up, and you press with your thumb and then pull it. That one and this blue one. You might use a screwdriver or something to help you press on those teeth. Okay. At this point, it's really easy. You just use your fingers or maybe you use a screwdriver to help you. You pull the plastic. Let's get one side. We got one. Oops. You want to be careful not to break here your trim panel. Once you get one side going, you just hold it and then, there it is. Easy enough. Then you put your new one back in. Reverse the procedure. Let's see; oops. Obviously, it's got a little thing so you can't do it wrong, which I tried to do. Okay. Put it back in. Connect your harnesses again. Put the trim panel back in. Screws. Both back in. I won't bore you with all the details. Then, tighten them up pretty good. Tighten just about as much as you can with a screwdriver-type tool and that'll hold it all together. Pretty easy thing.

Hope this helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the internet. Feel free to call us toll-free: 888-844-3393. The Company that's here for you on the internet and in person. Thank you.

Tools needed for replacement:

    Star Drivers & Sockets

  • T27 Torx Driver

2000 - 2005  Chevrolet  Impala
Search Videos
Go To Top

Same Day Shipping

Need your part faster? Choose expedited shipping at checkout.

Guaranteed To Fit

Highest quality, direct fit replacement auto parts enforced to the strictest product standards.

USA Customer Support

Exceeding customers' expectations, our team of passionate auto enthusiasts are here to help.

Instructional Video Library

Thousands of how-to auto repair videos to guide you step-by-step through your repair.

Loading...