How to Replace Marker Light Bulb 1997-2003 Chevy Malibu
Created on: 2011-09-21
How to repair, install, fix, change or replace a broken, damaged, cracked, faded, cloudy, or chipped signal light on Chevy Malibu, years 97, 98, 99, 00, 01, 02, and 03.
-
step 1 :Removing the Side Marker Light
- Remove the T15 screw on the back of the light
- Remove the side marker light
-
step 2 :Servicing the Bulbs
- Twist the bulb socket counterclockwise out of the light
- Pull the bulb off of the socket
- Push on the new bulb
- Twist the bulb clockwise into the light
-
step 3 :Installing the New Side Marker Light
- Insert the side marker light into place
- Tighten the T15 Torx screw
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we show you how to replace the front side marker lights on this 2001 Malibu, same as any '97 to '03. Only tool you'll need is a T15 Torx screwdriver.
You'll want a T15 Torx driver. Just a little screw right in the back here, remove that.
For the bulb, you just twist counterclockwise and pull it out. If you need to change this bulb, it just pulls straight out. Push this back in.
At 1A Auto, we do sell new ones of these. Obviously, my old one's in fine shape. If you need a new one you can get one on our website.
Put it back in with a T15 screw again.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
How to Replace Corner Light 2001-04 Toyota Tacoma
Check out this video on how to replace the corner/turn signal light on your 01-04 Toyota Tacoma.
