How to Replace MAP Sensor 2008-12 Jeep Liberty
Created on: 2019-12-02
The Manifold Absolute Pressure (MAP) sensor measures the air coming into your fuel injected engine to determine how much fuel to add to get the right mix. A failing or failed sensor will contribute to rough or inefficient running engines. It will likely also trigger a check engine light. Replacing a failed sensor should be a priority. How to install a new MAP sensor from TRQ that is designed to perfectly fit your 2008-12 Jeep Liberty.
Tools needed
-
13mm Socket
Socket Extensions
14mm Socket
15mm Socket
Serpentine Belt Tensioner Tool
9/32 Inch Socket
Ratchet
Shop Products
Jeep Dodge Ram Chrysler Mitsubishi MAP Sensor TRQ ESA93199
Part Details:
- Quality Tested - built to a strict level of product standards.
Bad Inner Tie Rod End On Your Car or Truck Is It True I Should Replace Them in Pairs
Len points out some of the things that could go wrong if you want to replace just an inner or outer tie rod alone, and why it just might make sense to replace them both together at the same time!
