How to Replace MAP Sensor 2002-04 Chrysler Sebring
Created on: 2013-10-24
Easily replace the MAP sensor in your 02-04 Chrysler Sebring with step-by-step instructions in this video form 1A Auto.
-
step 1 :Removing the Manifold Absolute Pressure (MAP) Sensor
- Disconnect the MAP sensor wiring harness
- Remove the 7mm bolt from the MAP sensor
- Pull the MAP sensor up and out of the intake manifold
-
step 2 :Installing the MAP Sensor
- Push the new MAP sensor into the intake manifold
- Insert the 7mm bolt into the MAP sensor
- Connect the MAP sensor wiring harness
Tools needed
-
Socket Extensions
7mm Socket
Ratchet
Swivel
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace the MAP sensor on this 2004 Chrysler Sebring sedan with a 2.7L engine. It's pretty much the same operation for model years 2004 through 2006. For this repair you'll need a new MAP sensor from 1A Auto, as well as a 7mm socket, swivel extension and ratchet.
You're going to find the MAP sensor on the intake manifold right there. Go ahead and press the clip and remove the connector. Next you're going to want to locate the 7mm bolt underneath the connector that holds it in place. I found that the best way to do this is with a 1/4" ratchet, 7 mm socket, the extension, and a swivel. You can get it in there and it's pretty close quarters. I'll go ahead and fast-forward as I unscrew that.
Here you see the old part up there at the top and the new part from 1A Auto. It's got the exact same connectors, two o-rings to seal it, and the same mounting points. Then go on back in, place the sensor in the hole on the intake, get your 7mm screw lined up, and I'll go ahead and fast-forward as I tighten that up. Now you can take your connecter and plug it back in.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
How To Replace MAP Sensor 1998-2006 Suzuki XL-7
If the manifold absolute pressure (MAP) sensor needs to be replaced, this short how-to video shows how to do this simple job yourself
