How To Replace MAP Sensor 1998-2006 Suzuki XL-7
Created on: 2014-02-14
If the manifold absolute pressure (MAP) sensor needs to be replaced, this short how-to video shows how to do this simple job yourself
-
step 1 :Removing the Manifold Absolute Pressure (MAP) Sensor
- Disconnect the MAP sensor harness
- Remove the 4mm Allen bolts on the MAP sensor
- Remove the MAP sensor
-
step 2 :Installing the MAP Sensor
- Insert the MAP sensor into place
- Insert the 4mm Allen bolts to the MAP sensor
- Connect the MAP sensor harness
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and the next time you need a part for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace the MAP sensor on this 2002 Suzuki XL-7. The tools you'll need include a 4mm Allen bit and a ratchet.
Your map sensor is located right here. You want to start off by disconnecting the harness. Just push the tab and pull it free. Then remove these two 4mm Allen bolts. We'll just fast-forward as Don does this. Once the bolts are removed, you can pull that sensor up and off.
Take your new sensor and push it down into place. Replace those two Allen bolts. We'll just fast-forward as Don replaces those and tightens them up. Then reconnect your harness and you're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
How to Replace MAP Sensor 2005-09 Chevy Equinox
In video, How to remove, replace and install a new MAP sensor in your vehicle to the 05, 06, 07, 08, 09 Chevy Equinox
