1A Auto Video Library
Our how-to videos have helped repair over 100 million vehicles.
Enter Vehicle Year Make Model

Specify your vehicle's year, make and model to guarantee fit.

Year
Make
Model
Options
Drivetrain

How to Replace Map Light Bulbs 2005-09 Chevy Equinox

Created on: 2017-01-05

How to replace map light bulbs on 05, 06, 07, 08, 09 Chevy Equinox.

  1. step 1 :Removing the Map Light Bulbs
    • Pry off the map light housing with a trim removal tool
    • Pry the microphone off of the map light with a trim tool
    • Push the microphone back through the map light housing
    • Disconnect the sunroof switch wiring harness
    • Pull the map light bulbs out of the sockets
  2. step 2 :Installing the Map Light Bulbs
    • Hold the bulb sockets in place
    • Push the bulbs onto the sockets
    • Connect the sunroof switch wiring harness
    • Push the microphone through the map light housing
    • Snap the microphone into map light housing
    • Line up the map light tabs
    • Snap the map light into place
    • Push the headliner behind the map light housing with a trim tool
    • Check that the lights and switches are working

Hi, I'm Mike from 1A Auto. We've been selling auto parts for over 30 years. We're dedicated to delivering quality auto parts, expert customer service, fast and free shipping, all backed by our 100% satisfaction guarantee. Visit us at 1AAuto.com, your trusted source for quality auto parts.

In this video we're going to be working with our 2008 Chevy Equinox. We're going to show you how to remove your map light cover and assembly to change the bulbs out. Your map light is the lights in the overhead console here in the front of the passenger compartment. If you like this video, please click subscribe. We have a ton more information on this car as well as many other makes and models, and if you need parts for your vehicle you can follow the link down in the description over to 1AAuto.com.Here are the items you'll need for this repair.

Using your interior trim removal tool from 1AAuto.com, slide up under the front edge of the map light assembly, pop it down, allow it to hang slightly and we'll grab, right in this little slot, the microphone, or you can push it down from the back. Once the microphone is dislodged, you can put it on an angle and it will fit through the housing here. You just got to find the right one. Disconnect the electrical connector.

Bring your map light housing out of the way. For either map light bulb, simply pull it out.

Support the bulb socket from the backside so you don't push it through, reinstalling your bulb. Line up the tabs and press your bulb into place.

Reinstall the connector for your sunroof motor switch. Place the microphone back through the housing in the same way you removed it. Line it back up and snap it back into the housing. Now, we'll wind up the rear tabs into the bracket in the ceiling, snap the bottom and the sides back into place.

Another nice thing you can do with the interior trim removal tools is get in there and make sure the headliner is pushed and tucked underneath there, nice and easy. Check for proper operation of your lights and switches and you're good to go.

Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.


recommended video

Car or truck pulling to one side on the highway Time for new tie rods or just an alignment

Sue shows you how to check out steering that drifts and pulls, so you will know if it's time to order some new tie rods!

Share on:
Go To Top

Same Day Shipping

Need your part faster? Choose expedited shipping at checkout.

Guaranteed To Fit

Highest quality, direct fit replacement auto parts enforced to the strictest product standards.

USA Customer Support

Exceeding customers' expectations, our team of passionate auto enthusiasts are here to help.

Instructional Video Library

Thousands of how-to auto repair videos to guide you step-by-step through your repair.