How To Replace Lock and Window Switch 2000-06 Chevy Suburban

Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.

Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.

In this video, we're going to show you how to replace the passenger side switch pack on this 2002 Chevy Suburban. The only tool you'll need for this is a T20 Torx driver.

Start off by just pulling up your switch panel and pulling it out. Then push the tab on the harness and disconnect it, and remove these two T20 Torx bolts. We'll just fast forward as Don does this. The switch pack will pull free.

Push your new switchback into the switch panel, and replace those two T20 bolts. Reconnect the harness and then push the back end first, and then clip down the front, and you're all set.

We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.