How to Replace License Light Bulbs on a 2002-07 Mazda 6
Created on: 2018-10-01
How to replace a broken, damaged or burnt out license plate bulb to the 02, 03, 04, 05, 06, 07 Mazda 6.
-
step 1 :Removing the License Plate Bulb
- Pry the side of the lens out with a trim tool
- Pull the 194 bulb straight off the socket
-
step 2 :Installing the License Plate Bulb
- Press the bulb straight to the socket
- Snap the lens into place
Tools needed
-
Gloves
Trim Tool Set
Hi, I’m Mike from 1A Auto. We’ve been selling auto parts for over 30 years!
Hey, guys. Sue from 1A Auto and today we are going to show you how to remove and replace the plate light bulbs on a Mazda 6 2007 model. If you need any parts for your vehicle, click on the link below and head on over to 1aauto.com.
I take a body tool. This flat blade, and I push it here aside and grab the other side and the lens will come right out. Let's see if I can get in there with this end. Pop the lens forward. Pull the lens out, and now you've exposed the 194 bulb.
And you grab it with your fingers firmly and pull it out. And that is a 194 bulb.
To install, just reverse procedure. Line up the electrical connector on the bulb and slide her into the socket. Grab your lens, fish it on up in there, and then snap it down into place. And reverse procedure. Just do the same thing over here. Same procedure.
Thanks for watching. Visit us at 1aauto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
How to Replace Damaged Wires
Check out this video to learn how you can replace damaged wires in your vehicle, then check out 1AAuto.com to get the supplies and tools you'll need to DIY
