How to Replace Jack Pads 1997-2006 BMW 325 Xi
Created on: 2019-06-13
Watch this video to learn how you can replace the jack pads on your 97-06 BMW 325Xi and other 3 Series vehicles.
-
step 1 :Removing the Jack Pads
- Pry out the push pin retainer from the center of the pad
- Pry out the pad
-
step 2 :Installing the Jack Pads
- Insert the jack pad into the body of the vehicle
- Insert the push pin retainer
- Tap the push pin retainer in with a hammer
Tools needed
-
Hammer
Plastic Fastener Remover
What's up, guys? I'm Andy from 1A Auto. In this video I'm going to show you how to replace this jack pad on this 2001 BMW 325Xi. If you need this part or other parts for your vehicle, click the link in the description and head over to 1AAuto.com.
All right, we're going to remove the mount that's located right here. We're raising the vehicle from this position right here, that's where you would lift it. You can do this on the ground though. So there's that one there, there's another one right here, and then two on this side, all four corners. I'm going to use this trim tool, we actually sell this trim tool at 1AAuto.com. There's a little pin right there. I'm going to slide that pin out, and just slide that pin out. Should be able to get it underneath the mount, and slide it out.
Here's the old jack pad, here's the new jack pad from 1AAuto.com, it's got the same shape, comes with a pin. Flip it over, it's got the same backing, a little rubber seal right there, same locking mechanism. Get yours at 1AAuto.com, you can do it yourself. Now, I just take the new jack pad, line that up, push it up there, take the pin. The pin's started. Then you take a little hammer, give it a little tap. There you go.
Thanks for watching. Visit 1AAuto.com for quality auto parts shipped to your door, the place for DIY auto repair. If you enjoyed this video, please click the Subscribe button.
Shop Products
How to Replace Jack Pad 2004-2010 BMW X3
This video shows you how to install a jack pad on your 2004-2010 BMW X3.
