Menu

1A Auto Video Library
Our how-to videos have helped repair over 100 million vehicles

How to Replace Intake VVT Solenoid 09-16 Toyota RAV4

Share on:
  1. step : Removing the Intake Variable Valve Timing Solenoid (0:23)
    • Pull the engine cover up to remove it
    • Locate the intake VVT solenoid on the rear passenger side of the valve cover
    • Disconnect the solenoid electrical connector
    • Remove the 10 mm bolt
    • Remove the VVT solenoid
  2. step : Installing the Intake Variable Valve Timing Solenoid (3:02)
    • Lubricate the solenoid gasket with oil or automatic transmission fluid
    • Insert the solenoid into position
    • Install the 10 mm bolt
    • Connect the electrical connector
    • Push the engine cover down onto the mounting pins

What's up, guys? I'm Andy from 1A Auto. In this video, I'm going to show you how to replace the intake VVT solenoid on this 2010 Toyota RAV4. If you need this part or other parts for your vehicle, click the link in the description and head over to 1aauto.com.

Just want to pull this cover off. Just grab underneath the cover, slide up, and up there and there is these retainers that hold it in and just push on little grommets right on those locations. Your intake VVT solenoid is on the back side here. It's similar to the exhaust solenoid. Just disconnect the connector right here. Push down on that and release that connector. Then, there's a bolt right here. We're going to take that bolt out first. I'm going to use a 10mm socket and an electric ratchet. You can use a regular ratchet if you don't have an electric one. Take that out. We can grab the solenoid, try to wiggle it back and forth a little bit. There's an O-ring that if there's any dirt or corrosion above the O-ring, it's a little bit tricky to remove the solenoid. Actually, so I can see it more, not that you have to do this, I am going to take these two nuts off right here just so I can move that wiring harness out of the way. Use the same 10mm socket and ratchet.

Slide this up. I'll just move that out of the way a little bit just so I can see, but you don't have to do this. This is just for the video. I am going to use a little water displacement oil. Just spray that down, let it soak a little bit, or some kind of lubricant. I'm going to take a straight blade screwdriver and just try to get in here a little bit. Just be careful, you don't want to mess up any of the machine surfaces. Be careful prying right here. You don't want to bend it if you're going to reuse it. Just work it back and forth. Just be careful doing this. Slide it up and there you go.

Now, take the VVT solenoid. I'm just going to take a little bit of transmission fluid, you can use engine oil or some other type of lubricant and just lubricate this before you slide it in and it'll just make easier installation. It's also a good idea if you're having problems with this and the solenoid had failed that after you do this job, you actually change the oil because the oil could be the cause of the solenoid failure. Just slide this in here. Just line it up. Don't force it. You want to get everything lined up because you don't want to mess up any of the machine surfaces. I'm going to slide that in just like that. I'll take the bolt, get the bolt lined up. Now, I'll just take a 10mm socket and ratchet and just snug this bolt down. Not too tight. Take the connector and line it up, lock it in place, and you didn't have to take this wiring harness off, but if you did, then install the wiring harness and then these two nuts, install those and tighten them down.

Slide it down. Take this cover and we want to line these little tabs up with these little pins right there. There's three of them. Just push it down and then you're good to go.

Thanks for watching. Visit 1aauto.com for quality auto parts shipped to your door. The place for DIY auto repair, and if you enjoyed this video, please click the subscribe button.

Tools needed for replacement:

    Ratchets & Related

  • Socket Extensions
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket

2009 - 2013  Toyota  Corolla
2009 - 2014  Toyota  Matrix
2009 - 2010  Pontiac  Vibe
2011 - 2013  Lexus  CT200h
2011 - 2016  Scion  tC
2010 - 2016  Toyota  Prius
2010 - 2016  Toyota  Camry
2008 - 2013  Scion  xD
2009 - 2016  Toyota  Highlander
2014 - 2016  Toyota  Corolla
2013 - 2016  Lexus  ES300h
2009 - 2016  Toyota  Venza
2011 - 2013  Toyota  Sienna
2012 - 2016  Toyota  Prius V
2009 - 2016  Toyota  Rav4
2009 - 2009  Toyota  Camry
2011 - 2014  Toyota  Tundra
2012 - 2015  Toyota  Prius Plug-In
2016 - 2016  Toyota  Avalon
2015 - 2016  Toyota  Avalon
2015 - 2015  Toyota  Avalon
2013 - 2016  Toyota  Avalon
2013 - 2014  Toyota  Avalon

11-13 Lexus; 09-10 Vibe; 08-13 Scion; 09-13 Toyota w/1.8L, 2.4L, 2.7L, 4.0L Intake or RH VVT Solnoid

Toyota Lexus Pontiac Scion Intake Variable Valve Timing Solenoid DIY Solutions

This part replaces:

  • Wells TS1073
  • Dorman 917-235
  • OE # 1533037010
  • OE # 153300T010
  • DIY Solutions ESS00722
Search Videos
Go To Top


Same Day Shipping

Orders ship same day when ordered by 2pm ET. Need your part faster? Choose expedited shipping at checkout.


Guaranteed To Fit

Providing you the highest quality, direct fit replacement auto parts enforced to the strictest product standards.


USA Customer Support

Exceeding customers' expectations every day, our team of passionate auto enthusiasts are here to help.


Instructional Video Library

Thousands of how-to auto repair videos specific to year, make and model guide you step-by-step through your repair.

Loading...