Menu

1A Auto Video Library
Our how-to videos have helped repair over 100 million vehicles

How to Replace Intake Airduct 14-19 Chevy Silverado

Share on:
  1. step : Removing the Intake Air Duct (0:06)
    • Disconnect the negative battery cable with a 10 mm socket
    • Loosen the worm clamp where the air duct connects to the air filter box
    • Loosen the worm clamp where the air duct connects to the throttle body
    • Disconnect the air hose at the driver side rear corner of the duct box
    • Disconnect the air hose at the passenger side rear corner of the duct box
    • Remove the intake air duct by sliding its rubber boots off the air box and throttle body connections
  2. step : Installing the Intake Air Duct (1:39)
    • Lower the intake air duct into position
    • There is a bracket on the passenger side corner that it rests on
    • Connect the air duct boots to the air box and the throttle body
    • Tighten the worm clamps at the air box and throttle body
    • Reconnect the air hose at each corner of the air duct box
    • Reconnect the negative battery cable and tighten it with a 10 mm socket

What's up, guys? I'm Andy from 1A Auto. In this video I'm going to show to replace the intake air duct on this 2015 Chevy Silverado. If you need parts for your vehicle, click the link in the description and head over to 1aauto.com.

I want to disconnect the negative terminal on the battery. I'm going to use a 10 millimeter socket extension ratchet. Loosen this up. Grab the negative terminal. Slide it off. Set it aside so it doesn't arc out by accident. Loosen up this one clamp right here. Also, over here there's a one clamp back here near the throttle body. Loosen this one up with the same straight blade screwdriver. Now take this snorkel off this side, off the air box. And then over here there's two pipes on each side. There's this little gray lock that you have to push down on the lock and then slide it out. Just like that. And you have to do the same on the side. This one I'm pushing up from underneath and then slide it up.

And then I grab this and just slide it back. Wiggle it a little bit and the whole thing comes up. Now we're going to slide this into position. Now there's a little bracket right here that's going to slide into that spot right there. So slide it on the mast, on the throttle body first, and get that lined up there. You can take and slide this on right here onto the air box. That's good. I'm going to take a straight blade screwdriver. Tighten up this one clamp right here on the throttle body. And then tighten this one up as well. Now we'll take these hoses, these are going to clip in. Make sure they lock in place, and the same on this side.

I'm going to take the negative battery cable. Hook it up to the negative side of the battery, and I'm going to take a 10 millimeter socket extension and ratchet. Just snug this up. Grab the cable--just make sure it's nice and tight. Won't loosen up.

Thanks for watching. Visit 1aauto.com for quality auto parts shipped to your door. The place for DIY auto repair and if you enjoy this video, please click the subscribe button.

Tools needed for replacement:

    Ratchets & Related

  • Socket Extensions
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket


Search Videos
Go To Top


Same Day Shipping

Orders ship same day when ordered by 2pm ET. Need your part faster? Choose expedited shipping at checkout.


Guaranteed To Fit

Providing you the highest quality, direct fit replacement auto parts enforced to the strictest product standards.


USA Customer Support

Exceeding customers' expectations every day, our team of passionate auto enthusiasts are here to help.


Instructional Video Library

Thousands of how-to auto repair videos specific to year, make and model guide you step-by-step through your repair.

Loading...