How to Replace Install License Plate Bulbs 2007-14 Chevy Suburban
Created on: 2017-06-27
How to replace a broken, damaged or burnt out license plate bulb to the 09 Chevy Suburban.
-
step 1 :Removing the Bulb
- Remove the two Phillips screws from the bulb cover
- Remove the bulb
-
step 2 :Installing the Bulb
- Press the bulb into place
- Tighten the two Phillips screws to the cover
Hi, I'm Mike from 1A Auto. We've been selling auto parts for over 30 years. We're dedicated to delivering quality auto parts, expert customer service, fast and free shipping, all backed by our 100% satisfaction guarantee. Visit us at 1AAuto.com, your trusted source for quality auto parts.
You have two license plate bulbs. You'll need a Phillips head screwdriver, which is the one with the four points, and there's two Phillips screws. Remove those. You can see the lens comes down and you can just reach up in there and shake back and forth a little bit and pull the bulb out. Ours is okay. You get a new one, push it back up in and over and tighten your screws back up.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
Clicking noise coming from the front end of your car or truck How to diagnose CV axle problems
Andy shows you how CV axles might begin to click, clank, or clack when they have problems!
