How to Replace Fog Light Assembly 2013-17 Ram 1500
Created on: 2018-06-14
New Fog / Driving Light from 1AAuto.com How to install, repair, fix, change, or replace a broken, damaged, burned out, cracked, faded, cloudy or chipped fog light on 13, 14, 15, 16, 17 Ram 1500
-
step 1 :Removing the Fog Light Assembly
- Remove the electrical connection
- Remove the three 10mm bolts
- Pull straight out on the assembly to remove it
- Unclip the harness if applicable
-
step 2 :Reinstalling the Fog Light Assembly
- Line up the assembly
- Push it in
- Snug up the 10mm bolts
- Reconnect the electrical connection
- Position the wiring harness in the original location
- Adjust as necessary
- Test the lights to make sure they work
Tools needed
-
Socket Extensions
10mm Socket
Ratchet
Hi, I'm Mike from 1AAuto. We've been selling auto parts for over 30 years.
To get to your fog light bulbs, this will be the same on both sides. Go up here. There is a white clip that's locking the connector to the bulb. It's actually kind of gray. Lift it up, and then push the connector back to unlock it.
With the light unplugged, we can remove the three bolts holding the fog light in place. They're 10 mm, I'm gonna use a 10 mm socket extension and ratchet. Start with this top one here. Do the same for the other two.
The fog light assembly is going to start to get really loose. Gonna hold it with one hand, so it doesn't fall out. Get this bolt out of here.
With those bolts removed, we can pull the fog light right out of here. The harness is clipped to it, so we'll pull it off like that and just slide it right out.
Here's our original fog lamp, driving lamp assembly from our vehicle, and our brand new replacement one from 1A Auto. Comes with a bulb. This is how you would adjust the aim. The bracket is the same, has this protective plastic on here, we can peel this off. This is the passenger side, but the driver's side is identical, and the procedure to replace it is very similar, just the opposite side. This is gonna work great, fit great and look great in your vehicle.
We're gonna reinstall this. Here's a little locating pin above this bolt hole here, and there's a corresponding opening in the bracket that's inside the bumper.
We're ready to put this in, we'll go up inside and this edge is gonna slide in just like that. And then the tab is gonna locate it right there. I'm gonna grab one of the bolts, I'll start with one of these top ones on the inside, 'cause it's started by hand.
And I'll do the same for the other two. Don't want to crack the plastic. Once you feel it get tight, you can stop. And the final one. And the harness up in place here. It'll slip back in and then, of course, plug it back in to the light so it works. It won't really snap, but make sure it locks in place.
You need to adjust it, and you can turn this up or down to adjust the aim. The job is complete, the other side will be very similar.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
Shop Products
2013-18 Ram 1500 Truck Driver Side Fog Light DEPO 334-2020L-AC
- Features and Benefits
How To Replace Fog Light Assembly 2005-09 Audi A4
Learn how to replace the fog light assembly or replace the bulbs on the 05-09 Audi A4 with this how-to video
