How to Replace Inner Tail Light Bezel 2010-13 Chevy Camaro
Created on: 2017-04-03
How to install, repair, fix, change or replace a broken, damaged, burned out, cracked, faded, cloudy or chipped tail light / brake light on 10, 11, 12, 13 Chevy Camaro
-
step 1 :Removing the Inner Tail Light Bezel
- Remove the three plastic tabs from the tail light panel
- Remove the panel
- Pry out the trim bezel from the inner tail light with a plastic trim tool
-
step 2 :Installing the Inner Tail Light Bezel
- Line up the tabs on the bezel
- Pop the bezel into place
- Set the three tabs into the panel
Hi, I'm Mike from 1AAuto. We've been selling auto parts for over 30 years! We're dedicated to delivering quality auto parts, expert customer service, and fast and free shipping, all backed by our 100% satisfaction guarantee. So visit us at 1AAuto.com, your trusted source for quality auto parts.
In this video we're going to be working with our 2011 Chevy Camaro. We're going to show you how to remove and replace your vehicle's inner tail light bezel, this is the same on the passenger and the driver’s side.
If you like this video, please click subscribe, we have a ton more information on this and many other vehicles, and if you need this part for your car, you can follow the link down in the description of the 1AAuto.com.
Here are the items you'll need for this repair: interior trim removal tools
Remove the three plastic tabs. This is called the tail lamp close-out panel. We'll use a trim tool for this. You can use the plastic one, or I have a steel one here. You can also do this with a pair of needle nose pliers or a flat blade screwdriver. Just lift the center tab up. You don't need to remove it fully. Then pop the base of it out. We'll do the same thing on the other two.
Remove the close out panel. Remove the trim bezel from the inner tail light, with a plastic trim tool. Some people like to use a flat blade screwdriver for this, but personally, I prefer the plastic trim tool because, it's usually still rigid enough to pop it out without needing to put a metal screwdriver blade against your lens, and potentially crack or damage it. Just kind of go around and slowly work the tabs out and remove the bezel.
Line up the tabs on the bezel, and pop it in until it locks into place. Install your close out panel and set the three tabs back in, leave the tops popped up, set the bases in fully, and you simply push them down, and you're good to go.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
How to Replace Outer Tail Light and Bulb 2005-10 Volkswagen Jetta
How to install, repair, fix, change or replace a broken, damaged, burned out, cracked, faded, cloudy or chipped outer tail light / brake light on 05, 06, 07, 08, 09, 10 Volkswagen Jetta.
