Created on: 2020-03-19
Check out this video to learn how to install a new inner tail light housing on your 2013-2015 Nissan Sentra.
10mm Socket
Ratchet
Trim Tool Set
Take these trim clips out here. There's some over here as well. If you wanna take the whole panel down, you can take them all out. Just use a trim tool. Pop the center out. Pop the rest out. Slide the panel down. This lever might be in your way. Just twist it to the side. The handle. Then slide that out.
Take these two 10-millimeter nuts off. Turn and this way. And grab the reflector. Just slide it up. There is some pushpins holding it in. Take the new one. Slide it into position. And just press it in. You should be able to lock it in place. And then put the nuts on. And tighten them up. Just snug. I'm gonna pull this retainer off here. Just use a trim tool. Just make it easier to install. I'm gonna take this panel and line it up. Slide the handle through. And put all your push clips back in. And take this retainer. Lock that in place. It goes just like that.
How to install, repair, fix, change or replace a broken, damaged, burned out, cracked, faded, cloudy or chipped taillight on Cadillac DeVille, years 94, 95, 96, 97, 98, or 99.