How to Replace Ignition Coils 2002-11 Toyota Camry
Created on: 2017-10-09
How to repair, install, fix, change or replace a bad or broken ignition coil / coil pack on 02, 03, 04, 05, 06, 07, 08, 09 Toyota Camry
-
step 1 :Disconnecting the Battery
- Disconnect the negative terminal with a 10mm socket
-
step 2 :Removing the Ignition Coils
- Remove the two 10mm nuts from the engine cover
- Remove the engine cover
- Disconnect the ignition coil wiring harness
- Remove the 10mm bolt from the ignition coil
- Remove the ignition coil
-
step 3 :Installing the Ignition Coils
- Insert the ignition coil into place
- Tighten the 10mm bolt to the ignition coil
- Connect the wiring harness
- Reinstall the engine cover
- Tighten the two 10mm bolts to the cover
-
step 4 :Connecting the Battery
- Connect the negative terminal with a 10mm socket
Tools needed
-
Socket Extensions
Flat Blade Screwdriver
10mm Socket
Ratchet
Hi, I’m Mike from 1A Auto. We’ve been selling auto parts for over 30 years!
Disconnect the negative battery terminal, it's a 10 millimeter nut.
Remove the plastic engine cover, two 10 millimeter nuts on the top. Cover should just slip off, let me put that aside. These are your four ignition coil packs, right on top of the engine. To remove them, well this tab is broken, but if the tab is not broken you push the tab in, pull it out. Push the lock in and pull it off.
To remove the coil pack, loosen the 10 millimeter bolt that's holding it into the head. This procedure's the same for the other three coils. Pull it straight up, and it'll come right off the spark plug. Repeat the procedure for the other three coils.
Install the new coil, and put it down over the spark plug. Until that gets tight, I'm just going to stop. Reconnect the modular connectors. Reinstall the plastic engine cover. The spark plugs and coils have been changed.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
Shop Products
Toyota Pontiac Scion 8 Piece Ignition Kit DIY Solutions IGN00526
Part Details:
- (4) Ignition Coils
- 8 Piece
- (4) Laser Iridium Spark Plugs
How to Replace Spark Plugs Ignition Coils Spark Plug Wires 2008-12 Jeep Liberty
Ignition coils help your vehicle's engine run efficiently, cleanly, and smoothly. Rough running, lower than expected mileage, or trouble codes are sure signs that it's time to replace yours. Since worn spark plugs can damage ignition coils, it's best to replace those at the same time. And, since this model also uses spark plug wires, those should be replaced as well. This video shows you how to install new quality TRQ ignition coils, TRQ Performance spark plug wires, and new spark plugs on your 2008-12 Jeep Liberty. • Check here for more videos on the 2008-12 Jeep Liberty: https://www.youtube.com/playlist?list=PLJVpHWuCEUX9CAHC1hzA-wBtLP-tJwrFO
