How To Replace Ignition Coil 2009-17 Volvo XC60
Created on: 2014-07-07
How to repair, install, fix, change or replace a bad or broken ignition coil on 2010 Volvo XC60.
-
step 1 :Removing the Ignition Coil
- Lift up the engine cover by hand
- Disconnect the ignition coil wiring harness
- Remove the 8mm bolt from the ignition coil
- Pull the ignition coil up and out
-
step 2 :Installing the New Ignition Coil
- Push the new ignition coil into place with the wiring connector facing the rear of the vehicle
- Insert the 8mm bolt into the ignition coil
- Connect the ignition coil wiring harness
- Push on the engine cover
Tools needed
-
Socket Extensions
8mm Socket
Ratchet
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace an ignition coil on this 2010 Volvo XC60 with the 3.2 liter inline-six non-turbo engine. The only tool you'll need for this is an 8mm socket and ratchet.
Lift up on your engine cover and pull it free. Then along the back of your engine you'll see your six ignition coils. On the one that you want to replace, just push the tab on the harness and disconnect it, and then remove that 8mm bolt. Now pull the ignition coil up and out.
Take your new ignition coil and push it down into place. Then replace that 8mm bolt. Now reconnect your harness. Make sure the grommets on your engine cover are in place and then push the cover back down into place. You're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
How to Replace Spark Plugs Ignition Coils Spark Plug Wires 2008-12 Jeep Liberty
Ignition coils help your vehicle's engine run efficiently, cleanly, and smoothly. Rough running, lower than expected mileage, or trouble codes are sure signs that it's time to replace yours. Since worn spark plugs can damage ignition coils, it's best to replace those at the same time. And, since this model also uses spark plug wires, those should be replaced as well. This video shows you how to install new quality TRQ ignition coils, TRQ Performance spark plug wires, and new spark plugs on your 2008-12 Jeep Liberty. • Check here for more videos on the 2008-12 Jeep Liberty: https://www.youtube.com/playlist?list=PLJVpHWuCEUX9CAHC1hzA-wBtLP-tJwrFO
