How to Replace Ignition Coil 2002-04 Suzuki XL-7
Created on: 2014-02-26
How to replace an ignition coil on a 2.7L V6 Suzuki XL-7 and Grand Vitara.
-
step 1 :Removing the Ignition Coil
- Remove the two Phillips head screws from the ignition cover
- Pull off the ignition cover
- Disconnect the ignition coil wiring harness
- Remove the 8mm bolt from the ignition coil
- Pull the coil up and out
-
step 2 :Installing the New Ignition Coil
- Put the new ignition coil into place
- Insert the 8mm bolt into the ignition coil
- Connect the ignition coil wiring harness
- Put the ignition cover into place
- Insert the two Phillips screws into the ignition cover
Tools needed
-
Phillips Head Screwdriver
8mm Socket
Ratchet
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace the ignition coil on this 2002 Suzuki XL-7 with the 2.7 liter V6 engine. The items you'll need for this are a Phillips screwdriver and an 8 millimeter socket and ratchet.
Because it's a V6, there are six ignition coils and spark plugs. There are three on this side, under this cover, and three more on this side under this cover. To access them, you have to remove this cover by removing these two Phillips screws. We'll just fast forward as Don removes those. Push the tab on the harness for the ignition coil that you want to remove and pull that harness free. Then remove this 8 millimeter bolt. Once it's removed, pull the ignition coil up and out.
Take your new ignition coil and push it down into place. Replace that 8 millimeter bolt. Reconnect the harness. Put this cover back into place, and then replace those two Phillips screws. You're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Shop Products
Chevrolet Suzuki Ignition Coil TRQ ICA61710
Part Details:
- No
- Male
- No
- No
- 3
- Female
- Blade
- 30000 VDC
- Direct Replacement
- Black
How to Replace Spark Plugs Ignition Coils Spark Plug Wires 2008-12 Jeep Liberty
Ignition coils help your vehicle's engine run efficiently, cleanly, and smoothly. Rough running, lower than expected mileage, or trouble codes are sure signs that it's time to replace yours. Since worn spark plugs can damage ignition coils, it's best to replace those at the same time. And, since this model also uses spark plug wires, those should be replaced as well. This video shows you how to install new quality TRQ ignition coils, TRQ Performance spark plug wires, and new spark plugs on your 2008-12 Jeep Liberty. • Check here for more videos on the 2008-12 Jeep Liberty: https://www.youtube.com/playlist?list=PLJVpHWuCEUX9CAHC1hzA-wBtLP-tJwrFO
