How to Replace Ignition Coil 1998-2011 Ford Crown Victoria
Created on: 2014-02-28
Watch this video to learn how to replace the ignition coil on a 98-11 Ford Crown Victoria.
-
The first two steps are for the driver's side
step 1 :Removing the Ignition Coils
- First two steps are for the driver's side
- Loosen the hose clamps on the air intake hose with a flat blade screwdriver
- Remove the air intake hose
- Disconnect the ignition coil wiring harness
- Remove the 7mm bolts from the ignition coil
- Pull the ignition coil forward, up, and out
-
The last two steps are for the driver's side
step 2 :Installing the New Ignition Coils
- Push the ignition coil down into place
- Insert and tighten the 7mm bolt
- Connect the ignition coil wiring harness
- The last two steps are for the driver's side
- Insert the air intake hose
- Replace and tighten the two hose clamps
Tools needed
-
Flat Blade Screwdriver
7mm Socket
Ratchet
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and the next time you need a part for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace an ignition coil on this 2004 Ford Crown Victoria with the 4.6 Liter V8 engine. The items that you're going to need for this include a new ignition coil from 1AAuto.com, a 7mm socket and ratchet, and if you're working on the driver's side ignition coils, you're going to need a flat blade screwdriver.
Now, on the driver's side, your ignition coils are covered up by this intake hose. You just have to loosen up those two hose clamps with a flat blade screwdriver and pull it free. Then you can access all four of those ignition coils.
On the other side the ignition coils you can access right now we're going to show you on the easiest one to see so we can show you the process. Just push the tab on this harness and pull it free. Then you want to remove the 7mm bolt. Once the bolt is removed, you just pull it forward, up, and out.
On the left is the old ignition coil; on the right is the new one from 1A Auto. You can see they're identical, and they'll mount exactly the same. Push your new ignition coil down into place, and back. Then replace that 7mm bolt. Once you've tightened it up, reconnect your harness, and you're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Shop Products
Ford Lincoln Mercury 8 Piece Ignition Coil Set TRQ ICA61510
Part Details:
- 8 Piece
- (8) Ignition Coils
- Direct Replacement
- Black
How To install Replace Ignition Coils 2-5L 2002-06 Nissan Altima
Learn how to replace ignition coils on your 02-06 Nissan Altima. 1A Auto will guide you with this video.
