1A Auto Video Library
Our how-to videos have helped repair over 100 million vehicles

How to Replace Ignition Coil 10-16 GMC Terrain

Share on:
  1. step : Accessing the Ignition Coils (0:31)
    • Disconnect the small hose from the air intake box
    • Use a flat blade screwdriver to loosen the upper and lower hose clamps
    • Remove the oil fill cap
    • Pull the engine cover up and off
    • Put the oil fill cap back on
  2. step : Removing the Ignition Coil (1:31)
    • Push back the white clip on the ignition coil wiring harness
    • Disconnect the harness
    • Remove the 10mm bolt from the coil
    • Pull the ignition coil out by hand
  3. step : Installing the New Ignition Coil (1:55)
    • Push the new ignition coil in by hand
    • Insert the 10mm bolt
    • Reconnect the wiring harness
    • Push the white clip on the harness in
    • Repeat Steps 2 and 3 for the other coils as necessary
  4. step : Reinstalling the Engine Cover (2:13)
    • Remove the oil fill cap
    • Put on the engine cover, lining up the three pins
    • Push on the air intake box using the two tabs
    • Push the hoses into the air intake box
    • Tighten the hose clamps with a flat blade screwdriver
    • Push the smaller hose into the air intake box

Brought to you by, your source for quality replacement parts and the best service on the Internet.

Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of Thanks.

In this video, we're going to show you how to replace the ignition coil on this 2014 GMC Terrain with a 2.4-liter four-cylinder engine. The only tool that you're going to need for this is a flat-blade screwdriver and a 10mm socket and ratchet.

Start off by disconnecting this hose. Then you want to loosen up this clamp. There's another one right down here. As you can see, you just need a flat-blade screwdriver and loosen up that bolt. Once both of those are loosened, pull the hoses free, and then lift that box up and off. Now, remove your oil-fill cap and pull up the engine cover. Replace the oil cap so nothing falls down into the engine.

Right here are your ignition coils. Push back on the white clip. Then, push the tab on the harness and pull it free. Then, using a 10mm socket and ratchet remove the 10mm bolt. Then, the ignition coil will pull up and out. Take your new ignition coil and push it down into place. Then replace that 10mm bolt. Repeat the process for any of the other coils you might want to replace.

Reconnect your harness and push that clip back in. Remove your oil cap. Line up these three holes with these three pins. Push your engine cover down into place. You want to line up those two holes with those two tabs and you want to push your upper hose into place. Then push that lower hose into place. We'll fast-forward as Don tightens up those two hose clamps. Then, push in that smaller hose and you're all set.

We hope this helps you out. Brought to you by, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.

Tools needed for replacement:

    Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket

2006 - 2011  Chevrolet  HHR
2007 - 2011  Chevrolet  HHR
2007 - 2008  Chevrolet  Malibu
2007 - 2010  Chevrolet  Cobalt
2008 - 2010  Chevrolet  Cobalt
2010 - 2017  Chevrolet  Equinox
2012 - 2015  Chevrolet  Captiva Sport
2006 - 2008  Chevrolet  Cobalt
2013 - 2016  Buick  Verano
2010 - 2016  Buick  LaCrosse
2011 - 2013  Buick  Regal
2011 - 2017  Buick  Regal
2012 - 2016  Buick  Verano
2007 - 2010  Saturn  Sky
2007 - 2010  Saturn  Vue
2007 - 2007  Saturn  Ion
2008 - 2014  Chevrolet  Malibu
2007 - 2008  Pontiac  G5
2007 - 2010  Pontiac  G5
2007 - 2009  Saturn  Aura
2006 - 2007  Saturn  Ion
2006 - 2010  Pontiac  G6
2006 - 2010  Pontiac  Solstice
2007 - 2010  Pontiac  Solstice
2011 - 2011  Saab  9-5
2010 - 2017  GMC  Terrain
2012 - 2017  Buick  Verano

06-10 Chevy Pontiac Saturn Multifit 2.0L 2.4L Ignition Coil

Ignition Coil TRQ

This part replaces:

  • Standard Motor Products UF-491
  • Hollander 610-00102, 182
  • OE # 12629646
  • OE # 12589623
  • OE # 12578224
  • TRQ ICA61804

Part Details

Search Videos
Go To Top

Same Day Shipping

Orders ship same day when ordered by 2pm ET. Need your part faster? Choose expedited shipping at checkout.

Guaranteed To Fit

Providing you the highest quality, direct fit replacement auto parts enforced to the strictest product standards.

USA Customer Support

Exceeding customers' expectations every day, our team of passionate auto enthusiasts are here to help.

Instructional Video Library

Thousands of how-to auto repair videos specific to year, make and model guide you step-by-step through your repair.