How to Replace Ignition Coil 2002-08 Jeep Liberty
Created on: 2014-01-10
Learn how to replace the ignition coil on your 02-08 Jeep Liberty with step-by-step instructions in this video.
-
step 1 :Removing the Ignition Coil
- Pull the hose out of its clamp
- Disconnect the ignition coil wiring harness
- Pull off the hose clamp
- Remove the 10mm nut from the ignition coil
- Pull the ignition coil up and out
-
step 2 :Installing the New Ignition Coil
- Put the new ignition coil into place
- Fasten the 10mm nut onto the ignition coil
- Connect the ignition coil wiring harness
- Push the hose clamp into place
- Push the hose into its clamp
Tools needed
-
Socket Extensions
10mm Socket
Ratchet
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace an ignition coil on this 2006 Jeep Liberty with the 3.7L V-6 engine. The only items you'll need for this are a new ignition coil from 1AAuto.com and a 10mm socket and ratchet with an extension.
Right here, is ignition coil 1, 3, and 5. On the other side, is ignition coil 6, 4, and 2. We're going to show you how to replace ignition coil 1, but it's a similar procedure. You just pull that hose out of the bracket, disconnect the harness by pushing the tab and then remove that hose clamp. This just pulls right off of the stud. Then, you want to remove this 10mm nut. We'll fast forward as Don does this. Once that's removed the ignition coil pulls right up and out.
On the left, is the old ignition coil. On the right, is a new one from 1A Auto. You can see they're identical. They're going to mount exactly the same. Take your new ignition coil and push it down into place. Now replace that 10mm nut and tighten it up. We'll fast forward as Don does this. Reconnect your harness. Push that hose clamp back into place. Re-clip the hose into place. Then you're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Shop Products
Jeep Dodge Chrysler Mitsubishi Ignition Coil TRQ ICA61670
- No
- Male
- No
- 7.1 Ohms
- No
- 0.78 Ohms
- 2
- Female
- Blade
- 30000 VDC
- Direct Replacement
- Gray
How to Replace Ignition Coil 1999-2000 Chevy Tahoe
This video shows you how to install a new ignition coil in your 1992-2000 Chevy Tahoe.
