Menu

1A Auto Video Library
Our how-to videos have helped repair over 100 million vehicles

How to Replace Ignition Coil 00-06 Toyota Tundra

Share on:
  1. step : Removing the Ignition Coil (0:54)
    • Remove the 10mm bolt from the ignition coil
    • Twist and pull the ignition coil up and out
    • Disconnect the electrical connector
  2. step : Installing the Ignition Coil (2:13)
    • Connect the electrical connector
    • Press the ignition coil into place
    • Tighten the 10mm bolt to the ignition coil

Hi, I’m Mike from 1A Auto. We’ve been selling auto parts for over 30 years!

Hi everyone, Sue here at 1A Auto. And today, we're going to show you how to replace your ignition coils on a 4.7 liter on our '03 Tundra today. If you need this part or any other part for your car, click on the link below and head on over to 1AAuto.com.

Hood releases on the driver's side knee kick panel. It's marked clearly with a hood popping open. Pull on the handle. The safety latch is to the right of the Toyota symbol. You'll feel a flat piece of metal there. Push up on it.

10-millimeter socket, and you loosen up the mounting bolt. You just take the mounting bolt right out, and put it aside. And you can just grab that coil and twist it and pull straight up. Now we can grab the connector a little bit easier, push on this tab, and pull up on it. There we go. And there we have a coil.

Here we have the new coil from 1AAuto.com and the coil that we took out of our '03 Tundra. As you can see, they needed them. There was a hairline crack, and they did some sort of like rubber repair here, maybe with RTV. That's a good band aid to get you out of the woods, but you still have a misfire. The coil from 1A Auto has the water seal. It's got the four-prong with the lock connector, mounting bolt. It's identical. This says Toyota on it. It's a factory part. If you need this part or any other part for your car, click on the link below, and head on over to 1AAuto.com.

Before I reinstall the coil, I like to put a little silicone paste on the tip. That just makes a good smooth contact, and on the boot, so that a little water resistant buildup. And then you're just going to slide it down in there. Line up the mounting bolt and push down firm. I'm going to click on the connector. Hear that snap. Grab that mounting bolt. And then tighten it down. You just want it tight. Once it bottoms out, use a little quarter turn. Repeat this process eight times on this 4.7 liter.

Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.

Tools needed for replacement:

    Ratchets & Related

  • Ratchet

  • Sockets - Metric

  • 10mm Socket

2001 - 2006  Lexus  LS430
2003 - 2009  Lexus  GX470
2001 - 2007  Lexus  GS430
1998 - 2007  Lexus  LX470
2002 - 2010  Lexus  SC430
2003 - 2009  Toyota  4Runner
1998 - 2007  Toyota  Land Cruiser
2000 - 2009  Toyota  Tundra
2001 - 2009  Toyota  Sequoia

98-10 Lexus, Toyota Multifit w/V8 Ignition Coil (Delphi)

Toyota Lexus Ignition Coil Delphi GN10311

This part replaces:

  • Hollander 610-58517
  • Standard Motor Products UF-230
  • Standard Motor Products UF-230T
  • Standard Motor Products UF-493
  • OE # 9008019027
  • OE # 9091902249
  • Beck Arnley 178-8313
  • Walker Products Inc. 921-2010
  • Standard Motor Products UF230
  • Wells C1173
  • Borg Warner E788
  • Delphi GN10311

Part Details

Search Videos
Go To Top


Same Day Shipping

Orders ship same day when ordered by 2pm ET. Need your part faster? Choose expedited shipping at checkout.


Guaranteed To Fit

Providing you the highest quality, direct fit replacement auto parts enforced to the strictest product standards.


USA Customer Support

Exceeding customers' expectations every day, our team of passionate auto enthusiasts are here to help.


Instructional Video Library

Thousands of how-to auto repair videos specific to year, make and model guide you step-by-step through your repair.

Loading...