Created on: 2014-04-18
If the horn is faulty or worn out, this short video shows how to remove and install a new one yourself
Flat Blade Screwdriver
8mm Socket
Ratchet
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace the horn on this 2009 Nissan Titan, and the only tools you'll need for this is an 8 millimeter socket and ratchet and a flat blade screwdriver.
Your horn's located right here and held in with an 8 millimeter bolt. Just go ahead and remove that bolt. Now use a flat blade screwdriver to just turn these clips and then pull out on this side of your grille, and you want to pull out on the grille while lifting the horn up and out, and then use a flat blade screwdriver to push in that tab and then pry out this red clip, and then pull the harness free.
Now reconnect the harness to your new horn and slide that red clip into place, and then pull back on the grille and feed the horn back down into place. Now you want to just pull those clips from the vehicle and then slide them into the grille. Now put the horn into place and replace that 8 millimeter bolt. It helps to just put it into the socket and feed it into place and then just tighten it up preliminarily, and then use the ratchet to tighten it up the rest of the way. Just push the grille back into place and you're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.