1A Auto Video Library
Our how-to videos have helped repair over 100 million vehicles.
Enter Vehicle Year Make Model

Specify your vehicle's year, make and model to guarantee fit.

How to Replace Hood Lift Support 1992-96 Toyota Camry

Created on: 2011-01-07

You can learn how to replace the hood lift support on your 92-96 Camry yourself. Watch this video from 1A Auto to see step by step instructions!

  1. step 1 :remove the hood support strut
    • Use a 12 mm combination wrench to remove the two 12 mm bolts.
    • Pull the strut out.
  2. step 2 :Install the new hood support strut
    • Line up the two studs and tighten down the nuts with your wrench.
    • Repeat on the other side.

Tools needed

  • 12mm Wrench

    13mm Wrench

Brought to you by 1AAuto.com, your source for quality auto replacement parts and the bets service on the internet. In this video, we're going to show you how to replace the hood struts on this '94 Camry. You know you need new ones when you put the hood up and it doesn't stay up on its own. You got to use a broom or something like that to hold it up. Pretty easy, you need a 12 and 13 millimeter wrench.

If you one these Camry's, you might be familiar with this. I've got the map holding up the hood here because the gas struts that hold the hood have started to wear out so I'm going to show you how to replace those. It's quite easy. The only think you really need is a 12 millimeter combination wrench and there are two bolts, one right there and you want to undo this bolt here that goes into the hood. Okay, I'm going to speed it up here as we're just loosening those bolts. Again, there are 12 millimeter bolts and also make sure that you have something supporting the hood. As you saw on the beginning, I had the broom there to hold the hood up. Here's your old assembly out. Make sure you save this bolt. Okay, here's the new assembly from 1AAuto. See, it's all the same, the same bracket and everything. It comes with a stud this thing clips on to. Let's install the stud. It makes a little difference to use the 13 millimeter nut rather than the 12. Okay, I'm just going to speed up tightening up that bolt. You want to tighten it up nice and firm, not extremely tight. Now, using our existing bolt from the car, we have a locating tab right here built into the fender. Again, we'll speed up tightening up, tightening up, putting it up and tightening up the bolt. Again, nice and firm, not extremely tight. Now, you see it lift up your hood. Pop that in.

It's all set. Now you can see my hood. One side replaced. You can see the hood is standing up a lot better. Once we replace the other side, then we'll be all set. We hope this helps you out. Brought to you by www.1AAuto.com, your source for quality auto replacement parts and the bets service on the internet. Please feel free to call us toll-free, 888-844-3393. We're the company that serves you on the internet and in person.

1992 - 1996  Lexus  ES300
1992 - 1996  Toyota  Camry

92-96 Toyota Camry Lift Hood Support LH & RH

1992-96 Toyota Camry Lexus ES300 Driver & Passenger Side 2 Piece Hood Lift Support Set TRQ GSA06797

Part Details:
  • 2 Piece
  • (1) Passenger Side Hood Lift Support
  • (1) Driver Side Hood Lift Support
$45.95

How to Replace Tailgate Glass Support Struts 2007-14 Chevy Suburban

New Lift Support from 1AAuto.com How to repair, install, fix, change or replace a weak or sagging hood or hatch strut on 07, 08, 09, 10, 11, 12, 13, 14 Chevy Suburban.

Share on:
Go To Top

Same Day Shipping

Need your part faster? Choose expedited shipping at checkout.

Guaranteed To Fit

Highest quality, direct fit replacement auto parts enforced to the strictest product standards.

USA Customer Support

Exceeding customers' expectations, our team of passionate auto enthusiasts are here to help.

Instructional Video Library

Thousands of how-to auto repair videos to guide you step-by-step through your repair.