How to Replace Hood Lift Support 2002-05 Mercury Mountaineer
Created on: 2014-10-24
How to repair, install, fix, change or replace a weak or sagging hood or hatch strut on 02, 03, 04, 05 Ford Explorer or Mercury Mountaineer
-
step 1 :Removing the Hood Support
- Support the hood with a piece of wood or have an assistant support the hood
- Pry off the clip at the top of the hood support with a flat blade screwdriver
- Pull off the top of the hood support
- Pry off the clip at the bottom of the hood support with a flat blade screwdriver
- Pull off the bottom of the hood support
-
step 2 :Installing the New Hood Support
- Push the bottom of the hood strut into place
- Push the top of the hood strut into place
- Test the hood supports by closing and opening the hood
Tools needed
-
Flat Blade Screwdriver
Assistant
Block of Wood
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace the hood support struts. The procedure is the same for any 2002 to 2005 Mountaineer as well as the Ford Explorer. You'll need new hood support struts from 1AAuto.com and a small flat blade screwdriver.
You can see, when we lift our hood, it just falls right back down again. This is a sign that your hood supports have gone bad. You want something or someone to support the hood while you do this procedure. We're going to use this block of wood. To remove these supports just take a flat blade screwdriver. Pry out on this clip. Then pull the piston from the stud. Then do the same thing down here. It pulls free. We're going to replace both of our hood supports. We'll just fast forward as Mike removes the other one.
Up top are the old hood supports. Below are the new ones from 1A Auto. You can see they're identical and they'll fit exactly the same. Now, to replace your hood support pistons, just push them onto the studs. You may need to lift the hood a little bit to get it to go onto the stud. Then we'll just repeat that process over here. Do the same thing: just push it onto the studs. Now you no longer have to support your hood. You just test it out. Close it. Open it back up. It should practically open itself. You're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
2002-05 Ford Explorer Mercury Mountaineer 2 Piece Hood Lift Support Set TRQ GSA04578
Part Details:
- 2 Piece
- (1) Passenger Side Hood Lift Support
- (1) Driver Side Hood Lift Support
How To Replace Rear Hatch Struts 2007-12 Dodge Caliber
How to repair, install, fix, change or replace, broken, weak or sagging tailgate lift support struts on Dodge Caliper, years 07, 08, 09, 10, 11, and 12.
