Menu

1A Auto Video Library
Our how-to videos have helped repair over 100 million vehicles.

How to Replace Heater Blower Motor with Fan Cage 10-17 GMC Terrain

Share on:

How to Replace Heater Blower Motor with Fan Cage 10-17 GMC Terrain

Created on: 2021-01-16

If the blower motor is bad or defective, find out how to do this easy replacement by following the steps in this how-to video

  1. step 1 :Removing the Blower Motor
    • Unbolt the plastic panel under the passenger side dash with a 7 mm socket and ratchet
    • Disconnect the blower motor harness
    • Remove the three quarter inch bolts securing the blower motor
    • Pull the blower motor down and out while unclipping the harness
  2. step 2 :Installing the New Blower Motor
    • Push the new blower motor into place
    • Tighten the three quarter inch bolts to the blower motor
    • Connect the wiring harness and clip it into place
    • Replace the plastic dash panel and secure the 7 mm bolts

Tools needed for replacement

  • Ratchets & Related

    Ratchet

  • Sockets - Metric

    7mm Socket

  • Sockets - SAE

    1/4 Inch Socket

Installation Video
Watch video

Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet. Hi, I'm Don from 1A Auto. I hope this how-to video helps you out and the next time you need a part for your vehicle, think of 1AAuto.com. Thanks.

In this video we're going to show you how to replace the blower motor on this 2014 GMC Terrain. The only tools you'll need for this is a 7 millimeter socket and a quarter inch socket and a ratchet. On the passenger side, underneath the glove box, you want to remove this panel. It's held in with three 7 millimeter bolts. One more, the third one right there. We'll just fast forward as Don removes all three of those. Now pull this panel straight back so it releases this clip.

Next you want to disconnect your blower motor harness. To do that you just push on the tab and pull the harness free. Next you want to remove these three quarter inch bolts. There's two right here and then one on the back. We'll just fast forward as Don removes all three of those. Once those are removed, you can pull your blower motor down and out. You want to pull this harness free. Now your blower motor's free. Take your new one, push it up into place, and then replace those three quarter inch bolts and reconnect the harness. Take this panel and you want to push these two clips into these two slots. Push them back in and push the panel up and then replace those 7 millimeter bolts. Then you're all set.

We hope this video helps you out. Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free 888-844-3393. We're the company that's here for you on the Internet and in person.

Tools needed for replacement:

    Ratchets & Related

  • Ratchet

  • Sockets - Metric

  • 7mm Socket

  • Sockets - SAE

  • 1/4 Inch Socket

2006 - 2009  Pontiac  Torrent
2008 - 2010  Saturn  Vue
2012 - 2015  Chevrolet  Captiva Sport
2006 - 2017  Chevrolet  Equinox
2010 - 2017  GMC  Terrain
Search Videos
Go To Top

Same Day Shipping

Need your part faster? Choose expedited shipping at checkout.

Guaranteed To Fit

Highest quality, direct fit replacement auto parts enforced to the strictest product standards.

USA Customer Support

Exceeding customers' expectations, our team of passionate auto enthusiasts are here to help.

Instructional Video Library

Thousands of how-to auto repair videos to guide you step-by-step through your repair.

Loading...