Created on: 2011-06-08
Watch this video to learn how to replace and service the headlight assembly and bulbs on your 00-05 Buick LeSabre.
Socket Extensions
Flat Blade Screwdriver
10mm Socket
Ratchet
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike Green. I'm one of the owners of 1A Auto. I want to help you save time and money repairing or maintaining your vehicle. I'm going to use my 20-plus years experience restoring and repairing cars and trucks like this to show you the correct way to install parts from 1AAuto.com. The right parts installed correctly: that's going to save you time and money. Thank you and enjoy the video.
In this video were going to show you headlight replacement, both replacing the bulbs and replacing the entire assemblies, on this 2003 Buick LeSabre, same as any 2000 to 2005 LaSabre. The only tools you'll need are a 10mm socket and ratchet and extension as well as a flat blade screwdriver.
If you're just looking to replace headlights, then it's pretty easy. Right back here are your bulbs. Twist them counter clockwise and pull them out. Once you have the bulb out use your thumb, pull back on that tab and the bulb comes out. Reinstall is just a reverse of the procedure. Get that one. This one's a little more difficult to get to, but not impossible, and it's the same thing on the other side.
If you want to remove and replace your headlight, there are two 10mm bolts you need to remove: one here and then one right through there. I'll just speed it up here as I take out those two bolts. I've got a connector here. Pull out this tension pin, pull it back and pull your headlights out.
The new headlight from 1A Auto is the exact same as the old headlight just nicer, prettier, and shiner. On the back here we need to transfer this harness over. This side marker, twist out, pull out. On this plug there's a little tab here; use your finger or a screw driver. I've got these three tabs here. Just use a screw driver, pull them right up. That allows you to work on this harness, so you push down with your thumb, pull the tabs out with your thumb and push on the connector. Disconnect it and pull that harness right out.
On the new light, connect the high beam, put these in, and put our tabs back in to hold. Plug in our low beam here and slip on that connector. Put in and change the bulb here. Put that in. You can see on the back here is a little plastic grommet; the new one comes with a grommet. We can either pull it out of the fender or just take the new one off like that. I'm going to pull back some of this plastic. Plug our connector back in, put in this safety, peel off our plastic, and put it back in. Get that ball lined up with the socket and push it right in.
Now the long screw goes right in here. Push down nice and firm. Put our shorter screw right here. Well speed it up again as we tighten up those bolts. You want them firm; they don't have to be overly tight, though. With that you can take your old headlight and go from this to a nice new headlight like that. It takes years and miles off your vehicle.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Watch this video to learn how to replace and service the headlight assembly and bulbs on your 95-02 Pontiac Sunfire.