Menu

1A Auto Video Library
Our how-to videos have helped repair over 100 million vehicles

How to Replace Headlight Trim Molding 93-97 Ford Ranger

Share on:
  1. step : Removing the Grille (0:40)
    • Remove the six Phillips screws on the grille
    • Pull the grille up and out
  2. step : Removing the Parking Light (1:35)
    • Remove the 11mm nut from the parking light
    • Pull out the parking light
    • Disconnect the wiring harness
  3. step : Servicing the Bulb (2:20)
    • Twist the bulb socket counterclockwise out of the light
    • Pull the bulb off of the socket
    • Push on the new bulb
    • Twist the bulb clockwise into the light
  4. step : Removing the Headlight Trim (2:28)
    • Remove the 11mm bolt on top of the trim
    • Remove the two Phillips screws on the side of the trim
    • Remove the trim
  5. step : Installing the Headlight Trim (3:26)
    • Insert the trim into place
    • Tighten the two Phillips screws to the side of the trim
  6. step : Installing the Parking Light (4:42)
    • Connect the wiring harness
    • Line up the studs on the parking light with the holes on the vehicle
    • Tighten the 10mm bolt to the parking light
  7. step : Reinstalling the Grille (5:41)
    • Insert the grille into place
    • Tighten the 11mm bolt to the top of the trim
    • Tighten the six Phillips screws to the grille

Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.

Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.

In this video, we're going to show you how to replace the trim around the side parking lights on this 1996 Ranger, same as a '93 to '97 Ranger. Tools you'll need for this repair are a Phillips screwdriver and an 11 millimeter wrench or a socket & ratchet. We also did need a quarter inch socket, but I think it's because somebody put a quarter inch bolt in rather than a Phillips screw. Also, you'll notice that we put some other parts like the grille and new headlights in during this repair. It just makes the truck look a little fresher, adds a little bit of a face lift.

Remove the grille by removing six Phillips screws: one, two, three, four, five, and six. Now, the grille, you just kind of pull up at the top, up on the other side, over and up and out.

You'll want to remove the parking light which involves removing an 11 millimeter nut right there. An 11 millimeter with a ratchet. A wrench works fine as well. Now, put your fingers in behind here. It's held in by just a couple of pins that have to push through. Feed the wiring harness out.

Here's the signal light. If you're looking to just change his bulb, turn it counterclockwise. Pull it out. You're going to notice in these next couple clips that the headlight is removed from the truck. You do not need to headlight. I just am using some footage from a different project I was using, so again, you don't need to remove the headlight to remove these pieces of trim.

There are three fasteners. I've got a quarter inch bolt here, although I think it's probably supposed to be a Phillips screw. Then there are two Phillips screws down here. One there and one there. On our new one, we do have to attach the gaskets. We're just going to use some contact cement on the back edge. Put gasket on. Front and back. You can see we've started in, and we've actually tightened the two screws that go into the fender, and then we just want to get the top bolt in. We're going to keep that loose for when we put the grill together later.

What you're probably going to want to do is unplug the bulb from the harness and then put it in. Plug in the bulb. Make this and this line up with little clips. You're just going to peek in. Get one of them in. You might need to push the harness back in a little bit. Put the other one in. Make sure that you're stud up here is lined up. Push it right back. Put your 11 millimeter nut back on. Then just pick it up. We'll start a couple of these screws in.

What we do is we loosen up this eyebrow trim here. Going to push the grille down and hook in another trim. Here you can see on the other side I used some pretty good force to push that eyebrow trim in, and then get the grille snapped on over it, and then put the other screw on the outside of the grille.

Last screw on the grille, put that in. Tighten it down first. Then tighten that eyebrow trim, the top screw on that. Then put your other two screws in. When we tighten these up you don't need to have them crazy-tight, just have them nice and firm. Now you should be all set.

We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.

Tools needed for replacement:

    Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Phillips Head Screwdriver

  • Sockets - Metric

  • 11mm Socket
  • 10mm Socket

  • Wrenches - Metric

  • 11mm Wrench

1995 - 1997  Ford  Ranger
1993 - 1994  Ford  Ranger

95-97 Ford Ranger Pickup Black Grille, Headlight, Parking Light, & Parking Light Trim Set

1995-97 Ford Ranger Grille, Headlights & Corner Lights Kit 7 Piece Set DIY Solutions

This part replaces:

  • Partslink FO1213103
  • Partslink FO2520118
  • Partslink FO2521116
  • Partslink FO2503115
  • Partslink FO2502119
  • Partslink FO1200309
  • Partslink FO1212103
  • DIY Solutions GRI00056

Part Details

  • Finish: Paint to Match
  • Kit Includes: (2) Parking Lights
  • Quantity: 7 Piece Set
  • Kit Includes: (1) Black Grille
  • Kit Includes: (2) Headlights
  • Kit Includes: (2) Headlight Bezels
Top 5 Problems 2000-06 GMC Yukon Sierra Chevy Suburban Tahoe Silverado Avalanche Cadillac Escalade

Top 5 Problems 2000-06 GMC Yukon Sierra Chevy Suburban Tahoe Silverado Avalanche Cadillac Escalade

This video covers the top problems you may find on many of the GM full size truck and SUV vehicles!

Search Videos
Go To Top

Same Day Shipping

Orders ship same day when ordered by 2pm ET. Need your part faster? Choose expedited shipping at checkout.

Guaranteed To Fit

Providing you the highest quality, direct fit replacement auto parts enforced to the strictest product standards.

USA Customer Support

Exceeding customers' expectations every day, our team of passionate auto enthusiasts are here to help.

Instructional Video Library

Thousands of how-to auto repair videos specific to year, make and model guide you step-by-step through your repair.

Loading...