Menu

1A Auto Video Library
Our how-to videos have helped repair over 100 million vehicles.

How to Replace Headlight Assemblies 09-14 Nissan Murano

Share on:

How to Replace Headlight Assemblies 09-14 Nissan Murano

Created on: 2019-02-04

How to repair, install, fix, change or replace the broken, damaged, cracked, faded, cloudy, or chipped headlights on 09, 10, 11, 12, 13, 14 Nissan Murano

  1. step 1 :Removing the Bumper Cover
    • Remove the 14 clips from the plastic covers over the grille with a trim tool
    • Loosen the clips with a screwdriver and pry them up from the metal shield
    • Raise and secure the vehicle with a jack and jack stands
    • Remove the clips from the splash shield underneath with a trim tool
    • Remove the T20 Torx screws from the shield beneath the bumper
    • Remove the two 10mm bolts holding the bumper cover to the radiator support
    • Pry back the wheel well shield
    • Remove the 10mm bolt from either side of the bumper cover
    • Pop the bumper cover out and off
    • Press the pin and remove the lock tabs underneath the grille
    • Press the tabs on the grille with a flat blade screwdriver to loosen it
    • Pry the grille side tabs free with needle nose pliers
    • Lift the grille up and press the clips to remove it
    • Remove the push-pin tabs from either side of the bumper cover
    • Pull the bumper cover out
  2. step 2 :Removing the Headlight
    • Remove the four 10mm bolts from the headlight
    • Pull the headlight assembly forward
    • Pry the harness out from beneath the light
    • Disconnect the electrical connectors from the headlight
  3. step 3 :Installing the Headlight
    • Connect the wiring harnesses to the headlight
    • Line the headlight up and slide it into place
    • Tighten the four 10mm bolts to the headlight
  4. step 4 :Installing the Bumper Cover
    • Lift the bumper cover up into place
    • Press the bumper into place
    • Tighten the 10mm bolt on either end of the bumper
    • Press in the three push-pins where the bumper meets the metal bracket
    • Place the plastic pieces and their lock tabs to the bumper
    • Put the grille into place, clipping in the edge on either side
    • Press the push pins to the grille
    • Place on the plastic shield over the grille
    • Press the push-pins to the shield
    • Peel back the fender well liner and tighten the 10mm screw to either side of the bumper
    • Press the splash shield into place
    • Press the push-pins to the splash shield

Tools needed for replacement

  • General Tools

    Jack Stands

    Floor Jack

    Pick

  • Pliers, Cutters & misc Wrenches

    Needle nose pliers

  • Ratchets & Related

    Socket Extensions

    Ratchet

  • Screwdrivers & Related

    Flat Blade Screwdriver

  • Sockets - Metric

    10mm Socket

  • Specialty Tools

    Trim Tool Set

  • Star Drivers & Sockets

    T20 Driver

Installation Video
Watch video

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Floor Jack
  • Pick

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Socket Extensions
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket

  • Specialty Tools

  • Trim Tool Set

  • Star Drivers & Sockets

  • T20 Driver

2009 - 2014  Nissan  Murano
Search Videos
Go To Top

Same Day Shipping

Need your part faster? Choose expedited shipping at checkout.

Guaranteed To Fit

Highest quality, direct fit replacement auto parts enforced to the strictest product standards.

USA Customer Support

Exceeding customers' expectations, our team of passionate auto enthusiasts are here to help.

Instructional Video Library

Thousands of how-to auto repair videos to guide you step-by-step through your repair.

Loading...