How to Replace Hazard Switch 05-16 Toyota RAV4
How to Replace Hazard Switch 05-16 Toyota RAV4
Created on: 2021-01-16
Learn how to replace the hazard switch on the Toyota RAV4 with this how-to video
-
step 1 :Removing the Hazard Switch
- Pry off the hazard switch side trim panel with a trim tool
- Disconnect the electrical connector
- Press the clips on the hazard switch and remove it
-
step 2 :Installing the Hazard Switch
- Press the hazard switch into the trim
- Connect the electrical connector to the hazard switch
- Press the hazard switch side trim panel into place
Tools needed for replacement
-
Specialty Tools
Trim Tool Set
What's up, guys? I'm Andy from 1A Auto.
In this video, I'm going to show you how to replace the hazard switch on this 2010 Toyota RAV4. If you need parts for your vehicle, click the link in the description and head over to 1AAuto.com
Just take a trim tool. We're going to take this piece of trim right off. Just get underneath here. This is a plastic trim tool. That way you don't scratch anything. Slide it off. Then you can disconnect this connector right here. Slide it off.
Remove the hazard switch from the housing. On the backside, there's a couple of clips. You can use a screwdriver or just push on them and slide the switch right out.
All right, take the switch. Now, there is a slot that you need to line up with the groove. Just line that up and press it back in.
All right, we're going to plug the hazard switch back in just like that. And then, line up these tabs. Once it's all lined up, just press it in.
Thanks for watching. Visit 1AAuto.com for quality auto parts shipped to your door, the place for DIY auto repair. And if you enjoyed this video, please click the Subscribe button.
Tools needed for replacement:
- Trim Tool Set
Specialty Tools
