Menu

1A Auto Video Library
Our how-to videos have helped repair over 100 million vehicles.

How to Replace Grab Handle 98-12 Ford Ranger

Share on:

How to Replace Grab Handle 98-12 Ford Ranger

Created on: 2021-01-15

How to repair, install, fix, change or replace a broken or snapped off interior roof handle on 01 Ford Ranger

  1. step 1 :Removing the Grab Handle
    • Pry off the grab handle trim covers with a flat blade screwdriver
    • Remove the 5.5mm screws from the handle
  2. step 2 :Installing the Grab Handle
    • Tighten the 5.5mm screws to the handle
    • Press on the trim buttons

Tools needed for replacement

  • Ratchets & Related

    Socket Extensions

    Ratchet

  • Screwdrivers & Related

    Flat Blade Screwdriver

  • Sockets - Metric

    5.5mm Socket

Installation Video
Watch video

Hi, I'm Mike from 1AAuto. We've been selling auto parts for over 30 years! We're dedicated to delivering quality auto parts, expert customer service, and fast and free shipping, all backed by our 100% satisfaction guarantee. We've created thousands of videos to help you install our parts with confidence. That saves you time and money, so visit us at 1AAuto.com, your trusted source for quality auto parts.

In this video, we're going to be working with our 2001 Ford Ranger. We're going to show you how to remove and replace your overhead grab handle that's up on the ceiling in this truck on the passenger side. You may have one on the driver's side, and if that's the case this procedure will be exactly the same.

If you like this video, please click subscribe. We have a ton more information on this truck as well as many other makes and models, and if you ever need parts for your vehicle you can follow the link down in the description to 1AAuto.com.

Here are the items you'll need for this repair: flat blade screwdriver, 5.5mm socket, ratchet, socket extension

Remove the covers one each side of the grab handle with a small flat-blade screwdriver. They're just rubber, so you just have to get behind there and push in a little bit. You can pop them right out.

Take a 5.5 millimeter socket, ratchet, and extension, and remove the two screws up inside the handle.

Reinstall the handle over the openings. Reinstall your two 5.5 millimeter screws. You may want to start one part way just to secure the handle up there, and then install the opposite side to make sure everything lines up nicely.

Once the handle and the screws are installed, reinstall the covers. You can see that these are tapered, so this side will sit in there. Once you've popped both of your caps back in, double check that your grab handle is on there nice and secure, and you're good to go.

Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.

Tools needed for replacement:

    Ratchets & Related

  • Socket Extensions
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 5.5mm Socket


How to Find and Replace A Blown Fuse in Your Car or Truck

How to Find and Replace A Blown Fuse in Your Car or Truck

Watch this video to learn how to change a blown fuse. The experts at 1A Auto will show you how to locate and change a burnt out fuse in your car or truck.

Search Videos
Go To Top

Same Day Shipping

Need your part faster? Choose expedited shipping at checkout.

Guaranteed To Fit

Highest quality, direct fit replacement auto parts enforced to the strictest product standards.

USA Customer Support

Exceeding customers' expectations, our team of passionate auto enthusiasts are here to help.

Instructional Video Library

Thousands of how-to auto repair videos to guide you step-by-step through your repair.

Loading...