How to Replace Gas Pedal Pad 1988-99 GMC Sierra K1500
Created on: 2017-02-24
How to repair, install, fix, change or replace a worn, smooth, loose, or slippery gas pedal pad on 96 GMC Sierra K1500
-
step 1 :Removing the Brake Pedal Pad
- Remove the lock ring from the end of the pedal with a flat blade screwdriver
- Unhook the spring from the arm
- Remove the pedal
-
step 2 :Installing the Brake Pedal Pad
- Line up the spring into its slot and press the pedal into place
- Snap the hook of the spring onto the pedal shaft
- Press the lock ring on
Hi, I'm Mike from 1AAuto. We've been selling auto parts for over 30 years! We're dedicated to delivering quality auto parts, expert customer service, and fast and free shipping, all backed by our 100% satisfaction guarantee. So visit us at 1AAuto.com, your trusted source for quality auto parts.
Using the small flat blade screwdriver, remove the lock ring from the end of the accelerator pedal. Unhook the spring from the pedal arm and hand it down. Then, slide all of it off of the pedal.
Line up the spring into its slot in the pedal and slide it back onto the shaft. Snap the hook of the spring back onto the pedal shaft. Make sure that it actually works. Slide the lock ring back on. You just push it down as tight has you can with your fingers. You're good to go.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
Chevrolet GMC 3 Piece Pedal Pad Set General Motors OEM GMIMK00013
Part Details:
- 3 Piece
- (2) Clutch or Brake Pedal Pads
- (1) Accelerator Pedal Pad
How to Replace Accelerator Pedal Pad 1994-2004 Chevrolet S10
This video shows you how to install an accelerator pedal pad on your 1994-2004 Chevrolet S10.
