Created on: 2014-01-28
How to repair, install, fix, change or replace a damaged, worn out, faulty or shorted power window switch on Jeep Liberty, years 02, 03, 04, 05, 06, and 07.
Flat Blade Screwdriver
Phillips Head Screwdriver
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace the window switch pack on this 2006 Jeep Liberty. The only items you'll need for this is a flat blade screwdriver and a Phillips screwdriver.
Using a flat blade screwdriver, pry up your center console panel. Now use a flat blade screwdriver to pry up this red clip on your harness. Push the tab on the harness and pull it free. Now on the back of your switch pack there's three Phillips screws. Just go ahead and remove each of those. Now, your switch pack pulls off.
Take your new switch pack and push it into place and then replace those three Phillips screws. Just tighten them up. Put your center console panel down over the shifter and reconnect your harness and push that red clip in. Then push the center console panel down into place and you are all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Find out easy replacing the power window switch can be on the 00-05 Chevy Monte Carlo with this how-to video