How To Replace Front Turn Signal 1992-94 Toyota Camry

Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.

In this video, we're going to show you how to replace the bulb and/or the whole front signal assembly on this '94 Camry, same as any '92 to '94 Camry. The only tool you'll need is a Phillips screwdriver.

If you need to change the bulb or you broke your light on your front signal here you're going to start by removing a Phillips screw on the side marker. Once you have that most of the way out, then just gently, with a flat blade screwdriver, pry that out. There you can see the little pin. You can have that hang there and then there's a Phillips screw right in here. Remove that Phillips screw and pull out, and if you give it a good firm tug you pull your light right out like that. See there's basically a tooth that goes through a slot there and then here's your bulb.

Now you push the bulb in and twist counterclockwise to get it out and then same thing to put it back in.

Obviously the new light from 1A Auto is going to go in the same. I'm just putting the original one back in since it's in fine shape. What you want to do is put your socket back into the bumper first, then push that in that tight little tab. Finish off with your Phillips screw and screw for your side marker.

We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.