How to Replace Front Lower Engine Splash Shields 2007-10 Toyota Camry
Created on: 2017-10-31
Need to replace the splash shields on your 07-10 Toyota Camry? Learn how in this video!
-
step 1 :Removing the Splash Shield
- Remove the 10mm bolts from the splash shield
- Pry out the push clips
-
step 2 :Installing the Splash Shield
- Slide the splash shield into place
- Tighten the 10mm bolts to the shield
- Push in the push clips
Tools needed
-
Flat Blade Screwdriver
Phillips Head Screwdriver
10mm Socket
Ratchet
Trim Tool Set
Hi, I’m Mike from 1A Auto. We’ve been selling auto parts for over 30 years!
Under shields on our car, or splash shields as some people like to call them, these are really beat up and trashed. We've got some brands new ones from 1AAuto.com. They match exactly the contour and the shape of both sides. Just going to take these old ones off and put these new ones on.
To replace these, you're going to go along and find all of your self-tapping bolts. These are 10 millimeter on the front of the car here. Over here. Over here. Sometimes there are push clips. There's one back here, one in the middle to hold them together, and another one back here. So you want to pop those out. Use our prying tool. Just kind of pop up the middle. It helps unlock them, and you can pull them right out. The middle comes out. That's OK. You can put it back together.
Take a 10 millimeter socket, or you could use a Phillips head 10 millimeter socket. It's probably easier. And just start removing these. This shield's probably going to slide right out and fall, because it's only got these four bolts holding it on. Just going to grab onto it.
We'll take our new one, just slide it up into place. It kind of slides inside the bumper. Get one of our self-tapping screws caught. If it's easier, you can get one bolt caught, and then push the shield up into place.
Find the opening for the push clip. Push it into place. It helps hold it while you install the rest of the self-tapping screws. Make sure you thread these back through the other shield that they may go through. Let's remove all the bolts from this one. Take our other side, slide it up into the bumper, lined up. Install this bolt. You want to get this push clip lined up here and get it in place. That way, it stays while I bolt it up. You can also install the center push clip. So if your splash shields are hanging down, or damaged, or missing, you can get brand new ones from 1AAuto.com. The splash shields are looking great.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
How to Replace Engine Splash Shield 2011-2018 Volkswagen Jetta
This video shows you how to install an engine splash shield on your 2011-2018 Volkswagen Jetta.
