How to Replace Front Lower Control Arm 2008-12 Ford Escape
Created on: 2019-06-21
How to remove an old lower control arm that is rusty, broken, bent, or has a bad ball joint or bushings from your 08-12 Ford Escape, and replace it with a new, quality, engineered to fit part from TRQ.
Tools needed
-
21mm Socket
Torque Wrench
Hammer
Rust Penetrant
15mm Socket
Pry Bar
19mm Socket
3/8 Inch Drive Ratchet
1/2 Inch Breaker Bar
Shop Products
Ford Mazda Mercury Front Driver & Passenger Side 2 Piece Control Arm with Ball Joint Set TRQ PSA62218
Part Details:
- 2 Piece
- (1) Front Driver Side Lower Control Arm with Ball Joint
- (1) Front Passenger Side Lower Control Arm with Ball Joint
How to Replace Passenger Side Lower Control Arm 2007-14 Ford Edge
Control arms are a crucial part of the suspension system of your vehicle. They carry the load of the vehicle to the wheel and maintain its alignment. Control arms are large and strong. They contain rubber bushings for smoother rides at the cost of eventual wear. How to install a new quality TRQ passenger side lower control arm in your 2007-14 Ford Edge.
