Created on: 2017-08-15
How to repair, install, fix, change or replace a broken or snapped off interior door handle on 07 Honda Pilot.
Flat Blade Screwdriver
Phillips Head Screwdriver
Take a small, flat-bladed screwdriver and open up this cover in here. Put that cover aside. Take a Phillips head screwdriver, remove the two screws. So we're going to use the chrome handle to lift it out of the cavity. To disconnect the control rod, use a flat-bladed screwdriver to push the clip off of it. It just kind of slides to the side and then it can be pried up out of there. Lift this up and out. Disconnect the door lock. That is the inner door handle assembly.
Reinstall the door handle into your door panel. Plug the electrical connector back in the door lock switch. Get my handle lined up this way, reach in, and grab this control rod. Push it into the yellow clip. It's going to slide into it. Push it down with my flat bladed screwdriver and kind of maneuver it in there, but it's not locked in there. This needs to swing around and that will lock it.
Now there's this tab that's here that is going to go on the other side of the panel, so it's going to slide in this way. Push our electrical side in first, slip this in underneath, and put that in. Reinstall our Phillips head screws and replace our trim cover: two tabs on the top and a single tab on the bottom. Fits into the two spots on the top. The door handle is reinstalled.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
Check out this video if you want to learn how to do your own patching and painting! This tutorial will help you repair those deep dents and scratches!