1A Auto Video Library
Our how-to videos have helped repair over 100 million vehicles.
Enter Vehicle Year Make Model

Specify your vehicle's year, make and model to guarantee fit.

How To Replace Front Inside Door Handle 2003-08 Honda Pilot

Created on: 2015-07-02

How to repair, install, fix, change or replace a broken or snapped off interior door handle on 03, 04, 05, 06, 07, 08 Honda Pilot

  1. step 1 :Removing the Door Handle
    • Pry off the trim piece inside the door handle with a flat blade screwdriver
    • Remove the two Phillips screws in the door handle
    • Pry out the top of the door handle
    • Disconnect the door lock wiring harness
    • Disconnect the door lock rod
  2. step 2 :Installing the Door Handle
    • Connect the lock rod to the door handle
    • Connect the door lock wiring harness
    • Push the door handle into place
    • Insert the two Phillips screws to the door handle
    • Push on the trim piece inside the door

Tools needed

  • Phillips Head Screwdriver

    Flat Blade Screwdriver


Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.

Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks!

In this video, I'll be showing you how to remove and reinstall the inside door handle. I'll show you the driver side. The passenger side is pretty much the same. Even the rear doors are the same. You just may not have a harness to unplug. The only tools you'll need include a small flat blade screwdriver or a pick, as well as a Phillips screwdriver.

To start out, there's a panel behind the inside door handle. Use a small flat blade screwdriver or a pick and pry the top and the panel comes down and out. Then there are two Phillips, the black Phillips screws that hold the door handle in place. We'll fast-forward here as I remove those. Be careful not to drop them down into the door panel.
Once the screws are removed, pull the top out first and then rotate the front of the handle up and out. Then you'll have to reach in behind and disconnect the door lock switch if there is one. There's just a little tab that you push in and pull the door lock switch harness down. Then the door lock rod is connected in as well. There's a clip, a little white clip that you have to push off of the lock rod and then pull the lock rod up and out. Your door handle is off.

Here's reinstallation, and I'm a little bit embarrassed here because we have to reinstall the old door handle because at the time I filmed this video we had not carried the handles for this yet. You reconnect the lock rod, put the handle up in place, push the rod down into that white clip and then flip the clip around and lock it on.

Unfortunately, it's not really easy to video. Then get it close again and if you have a power door lock switch reconnect the door lock switch. Then just push the handle back into place. Push the bottom in first and then rotate the top in and it should snap into place. I'll fast-forward here as I put those two screws in. Again, be careful not to drop them down in the door panel. Then put the trim panel back in place.

Thanks for tuning in. We hope this video helped you out. Next time you need parts for your car, please visit 1AAuto.com. Also check out our other helpful how-to and diagnosis videos.

How to Replace Rear Inside Door Handle 2001-06 Chrysler Sebring

How to repair, install, fix, change or replace a broken or snapped off interior door handle on Chrysler Sebring, years 01, 02, 03, 04, 05, and 06.

Share on:
Go To Top

Same Day Shipping

Need your part faster? Choose expedited shipping at checkout.

Guaranteed To Fit

Highest quality, direct fit replacement auto parts enforced to the strictest product standards.

USA Customer Support

Exceeding customers' expectations, our team of passionate auto enthusiasts are here to help.

Instructional Video Library

Thousands of how-to auto repair videos to guide you step-by-step through your repair.