Created on: 2019-11-08
The inner tie rod has a ball joint that can wear over time, causing a clunking noise, loose steering, and eventually, other problems with the wheel and suspension components. It’s a good idea to replace your inner tie rods as soon as you notice any of these symptoms. How to replace the inner tie rods on your 2008-12 Jeep Liberty.
Torque Wrench
Hammer
Rust Penetrant
Pry Bar
19mm Socket
21mm Socket
Measuring Tape
Bearing Grease
Large Locking Pliers
Copper Anti-Seize
Straight Cutters
Cotter Pin
Wire Ties
Ratchet
Needle nose pliers
1/2 Inch Impact Gun
If the tie rod needs to be replaced, this video will show how to remove it and prepare a new on one the 98-04 Nissan Frontier