How to Replace Front Drivers Side Axle 2008-12 Jeep Liberty
Created on: 2019-11-22
A CV axle has flexible joints. Often, these joints wear out, or seize from contaminants due to the protective boot tearing open. A worn joint is prone to breakage, or other hazards. If your vehicle needs a new CV axle, install a quality TRQ axle that is engineered to your vehicle’s specifications. How to install one on the driver side of your 2008-12 Jeep Liberty.
Tools needed
-
Torque Wrench
Hammer
Socket Extensions
Rust Penetrant
Pry Bar
18mm Socket
19mm Socket
Safety Glasses
Pocket Screwdriver
21mm Socket
Side Cutters
21mm wrench
Rubber Mallet
Brake Caliper Hanger
34mm Socket
Sledge Hammer
Copper Anti-Seize
Center Punch
Cotter Pin
Drain Pan
Swivel
36mm Socket
1/2 Inch Impact Gun
22mm Socket
Shop Products
Jeep Liberty Dodge Nitro Front Driver & Passenger Side 2 Piece CV Axle Assembly Set TRQ CSA82603
Part Details:
- 2 Piece
- (1) Front Driver Side CV Axle Assembly
- (1) Front Passenger Side CV Axle Assembly
Whats That Noise From My Car Diagnosing Vibration Under Acceleration
Learn the steps to diagnosing a vibration in your vehicle. See how to road test, and check some of the common failure points that cause vibrations!
