Menu

1A Auto Video Library
Our how-to videos have helped repair over 100 million vehicles.

How to Replace Front Door Tweeter 00-07 Volvo V70

Share on:

How to Replace Front Door Tweeter 00-07 Volvo V70

Created on: 2021-01-16

How to remove a front door tweeter on 00, 01, 02, 03, 04, 05, 06, 07 Volvo V70

  1. step 1 :Removing the Front Door Panel
    • Raise the window
    • Pry off the sail panel behind the mirror
    • Pry off the trim cover from the door pull
    • Remove the six door panel clips with a small flat blade screwdriver
    • Remove the mounting screws from the door pull with a T25 Torx screwdriver
    • Grab the door panel and lift it up
    • Disconnect the interior door handle cable
    • Disconnect the speaker wiring harness
    • Disconnect the master window switch wiring harnesses
  2. step 2 :Removing the Tweeter Speaker
    • Press the tabs and lift the speaker up and out of the door
  3. step 3 :Installing the Tweet Speaker
    • Press the speaker into the door panel
  4. step 4 :Installing the Front Door Panel
    • Connect the window switch connectors
    • Connect the interior door handle cable
    • Connect the speaker wiring harness
    • Push the door panel and pushing it back in place
    • Line up the door panel with the door
    • Push in the six door panel clips
    • Tighten the T25 screw to the door panel
    • Press the T25 trim cover into the door pull
    • Press the sail panel on

Tools needed for replacement

  • Ratchets & Related

    Socket Extensions

    Ratchet

  • Screwdrivers & Related

    Flat Blade Screwdriver

  • Sockets - Metric

    10mm Socket

  • Star Drivers & Sockets

    T25 Driver

Installation Video
Watch video

Mike: Hi, I'm Mike from 1A Auto. We've been selling auto parts for over 30 years.

Sue: Hey, everyone. Sue here from 1A Auto, and today I'm going to show you how to replace that little tweeter speaker in your door panel on a Volvo V70 2003 model. If you need any parts for your car, click on the link below and head on over to 1AAuto.com.

First thing you're going to do is remove the cover to the mirror base. Just set that aside. Then we have a plastic piece here that you can see where it's split a little bit, so you just take a flat blade screwdriver or a body trim tool and peel that back. To get the top, I like to put the screwdriver up here and just push, like that. Set that aside. Now they have these body clips that are little push-pins. See this center tab? You just take an object, a small screwdriver or a punch, and push it in one step like that. Then you can take a flat blade screwdriver, and just pry it out a little bit. Pops right out.

I'm going to go around and do all of them. That's missing. Now I just grab the panel with my hand, pry it out a little bit, and all these body clips will pop right out. Just one up here. Then we have two mounting bolts that are a Torx bit star T25, and that is located behind that plastic piece on the handle. We're going to take those bolts out, grab the panel, and pull up.

Once it's pulled up, you'll see the door panel. This is the cable for the inner handle. Just grab it and pull it off. It's a real nice design. We have a little mini tweeter speaker, and we'll just take that clip out, push down on it, and pry that out. Then we have, the clip was on the backside of this main switch on this green connector. Pull it down. The same with this gray. Pull it up and you can see the clips. Those the push-pins on the back of the push clips. This little speaker up here in your door panel is called a tweeter speaker. If it's blown, or making a high pitched noise, you need to remove it. You need to, once the panel is off, you flip it over and you have, this is the tweeter speaker. You grab a flathead screwdriver, and you start to push on these tabs and give it a little lift up at the same time. There is four of them, or five, I'm sorry. Just pull it right up, and there is your little small door panel tweeter speaker.

To replace it, just reverse procedure. Line up all the little marks and just give it one good push. The first thing I like to do is hook up the electrical again. So here's my main power switch. I'm going to put that great plug in the back. Click it in. On both of them, the push button to release it is located inward. Now I've got my cable here for the door. It's a pretty cool design the way they do this. You don't have to fish that cable into anything. Just bring it right in there, and it snaps right in.

Now we're going to fish the block button through, and you've got this rail lip. Just slide that rail lip right up there, just like that. Bring it down. It's real easy. Now at this point, I like to put the mounting bolts in first, only because I want that secure before I put the plastic clips in. This is our T25. They've got the mounting inserts of the plastic mounts in the door already. Okay, I'm going to put the bottom on up. Double check, make sure they're both equally tight. Okay.

Now we can install the cover for the plastic handle. Just guide those two pins in and push it down. Then we have all the push-pins that go around, so this is what they look like when you push the end piece in. That lock clip goes out, so now you have to reverse it to put it together. You want to look like that. Put it right in the mounting hole, and push in until it snaps once. Then just go all the way around. The last thing to go on was the first thing to go off, so you're going to align these plastic tabs up with those inserts. It snaps right on. Now, I'm going to go inside. Make sure my inner handle works, and make sure my lock works in my windows. Wonderful. Beautiful.

Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.

Tools needed for replacement:

    Ratchets & Related

  • Socket Extensions
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket

  • Star Drivers & Sockets

  • T25 Driver


Brakes too Sticky or Not Working on your Truck

Brakes too Sticky or Not Working on your Truck

If your brakes are stuck or smoking, the 1A Auto mechanics in this video will explain a few different causes on these trucks and how you can fix it

Search Videos
Go To Top

Same Day Shipping

Need your part faster? Choose expedited shipping at checkout.

Guaranteed To Fit

Highest quality, direct fit replacement auto parts enforced to the strictest product standards.

USA Customer Support

Exceeding customers' expectations, our team of passionate auto enthusiasts are here to help.

Instructional Video Library

Thousands of how-to auto repair videos to guide you step-by-step through your repair.

Loading...