How to Replace Four Wheel Drive Switch 1998-2005 Chevy Blazer S10

Brought to you by 1AAuto.com, your source for quality replacements parts, and the best service on the Internet. In this video, we're going to show you how to replace the four-wheel drive dash switch on this 2000 Chevy Blazer, same as most of this era Blazer. The only tool you'll need is a flat blade screwdriver.

To remove this four-wheel drive switch; it's pretty easy. Just use a regular screwdriver, and carefully work it in to the top here. Be careful not to scratch your dash at all. If you push down a little bit, the switch pops out. There are two connections; the blue connector, work your screwdriver in, pull up and out. Then this white one; put your screwdriver right in there, and pull it out. Here on the left is the original switch. On the right is the new switch from 1A Auto. You can see it's all the same. It's going to plug in the same. What can happen on these switches is, when you press a button, you should see the light flash and then it goes solid. The light goes solid when the transfer case engages. What can happen is, these lights can go out and then you don't know what mode you're in. To re-install you can see also that the switch can go bad after time, too. Just plug everything back in, and you're all set.

We hope this helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts, and the best service on the Internet. Please feel free to call us toll free, 888-844-3393. We're the company that's here for you on the Internet, and in person.