How to Replace Forward Serpentine Belt 2000-08 Chevy Suburban 1500
Created on: 2017-03-03
How to repair, install, fix, change or replace a broken, noisy, squeaky, worn or groaning serpentine belt tensioneron 00, 01, 02, 03, 04, 05, 06, 07, 08 Chevy Suburban
-
step 1 :Removing the Air Intake
- Loosen the hose clamp after the MAF sensor
- Twist the boot from the MAF sensor
- Remove the hose clamp at the throttle bottle
- Disconnect the hoses from their clamps
- Remove the intake runner
-
step 2 :Removing the Serpentine Belt
- Familiarize yourself with the route of the serpentine belt
- Insert the 15mm wrench into the tensioner
- Turn the tensioner clockwise to loosen the belt
- Pull the belt off a pulley
- Release the tensioner
- Pull the belt off by hand
-
step 3 :Installing the Serpentine Belt
- Loop the belt around the harmonic balancer/crank pulley
- Bring it over the water pump
- Bring it under the power steering pulley
- Bring it around the belt tensioner
- Bring it under the idler pulley
- Pull the tensioner clockwise with the 15mm wrench
- Bring it around the A/C Pulley
- Release the tensioner
-
step 4 :Installing the Air Intake
- Insert the intake tubing into place
- Tighten the hose clamp to the MAF sensor and the throttle
- Clip in the hoses
Tools needed
-
15mm Wrench
Socket Extensions
Flat Blade Screwdriver
15mm Socket
Ratchet
Hi, I'm Mike from 1AAuto. We've been selling auto parts for over 30 years! We're dedicated to delivering quality auto parts, expert customer service, and fast and free shipping, all backed by our 100% satisfaction guarantee. So visit us at 1AAuto.com, your trusted source for quality auto parts.
In this video we're going to be working with our 2002 Chevy Suburban 5.3-liter V8. We're going to show you how to remove and replace your vehicles serpentine belt, this is the forward one not the rearward one that works your AC.
If you like this video, please click subscribe. We have a ton more information on this and many other vehicles and if you ever need parts for your vehicle you can follow the link down in the description over to 1AAuto.com.
Here's the items you'll need for this repair: flat blade screwdriver, 15mm wrench, 15mm socket, ratchet, socket extension
Loosen the hose clamp just after the mass air flow sensor. This is going to be the second one back from your air box. We'll do this using a flat blade screwdriver. Wiggle and twist the boot to release it from the mass air flow sensor. You may need to use your screwdriver to help peel it back here. These tend to get stuck on pretty good. We'll also remove the one at the throttle body. We'll need to disconnect the hoses from their clamps here. You can either try prying it out there, or there's also a little clamp at the bottom here that you should be able to compress, pop loose with a flat blade, and remove the intake runner from the vehicle.
We've removed some things like the radiator fan and the fan shroud to make it easier to show you what's going on, but you shouldn't need to do this if you're doing this job at home. Before removing your serpentine belt, make sure your vehicle has a belt path diagram under the hood somewhere. If this is missing or faded, you can just draw another one onto the plastic with something like a paint marker. Using a 15mm wrench on the tensioner, rotate the nut clockwise to slack the belt. Pop the belt off of whatever pulley is easiest for you to reach. Let the tension off the pulley and remove your serpentine belt.
Install the belt over the front grooves of the harmonic balancer or crank pulley. Bringing the right side over top of the pulley. We'll then go over top of the water pump and loop under the power steering pump, over the alternator, under the idler pulley. I'll keep this piece in my hand. Make sure that everything is seated because this one's kind of tight and you're going to want the room. Using my 15mm wrench, we'll take the tension off of the tensioner pulley, slide the belt over, double-check that our path is right, all of the belt is properly seated, and then let the tension back on.
Reinstall the intake tubing. It's easiest to set it onto the throttle body. Reengage the hoses into their clips and then get the boot over the air box. Then tighten down both clamps with a flat blade screwdriver.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
Shop Products
How to Replace Serpentine Drive Belt 2013-15 Subaru XV Crosstrek
How to repair, install, fix, change or replace a broken, cracked, snapped, or cut serpentine belt on 13, 14, 15 Subaru XV Crosstrek.
