Menu

1A Auto Video Library
Our how-to videos have helped repair over 100 million vehicles.

How to Replace Fog Lights 14-16 Audi SQ5

Share on:

How to Replace Fog Lights 14-16 Audi SQ5

Created on: 2021-01-16

New Fog / Driving Light from 1AAuto.com How to install, repair, fix, change, or replace a broken, damaged, burned out, cracked, faded, cloudy or chipped fog light on 14, 15, 16 Audi SQ5

  1. step 1 :Removing the Grille
    • Grab the grille with both hands
    • Pull the grille out
  2. step 2 :Removing the Fog Light
    • Remove the two T25 Torx bolt from the fog light
    • Pull the fog light out
    • Press the tabs and disconnect the wiring harness
  3. step 3 :Installing the Fog Light
    • Connect the wiring harness
    • Insert the fog light into the bumper
    • Tighten the two T25 Torx bolts to the fog light
  4. step 4 :Installing the Grille
    • Press the grille into the bumper

Tools needed for replacement

  • Star Drivers & Sockets

    T25 Driver

Installation Video
Watch video

Hi, I’m Mike from 1A Auto. We’ve been selling auto parts for over 30 years!

To replace this fog light, it will be the same on both sides. You just have to pull this grille out of the bumper. It takes a good amount of force. Might have to use two hands. Kind of reach your fingers in here and give it a good strong pull. It will pop right out. Put that aside.

There's two T25 Torx bolts holding this in: one here and one here. Just going to use a Torx bit on the end of this extension and ratchet. Remove this one. Remove the other one. Pull the fog light lens straight out. Just slide this little tab out from behind the bumper and unplug it. Just kind of push these together and then unlock it.

Pull it apart. Change the bulb after we unplug it. Just turn it counterclockwise. Pull it out of the housing.

Here's the original, here's our brand new one from 1A Auto. You can see it's got the same style mounting and this little tab piece. This one actually came with a bulb installed. This lens is nice and clear, and this one's all pitted and dirty from driving down the road. This will fit great and really help with seeing at night.

Just going to plug it back in. Feed the harness back in. This tab is going to go into this little opening here. Slide that right back there. Reinstall these Torx screws. Just tighten them a little bit, you don't have to kill them. Do the same for the other one.

Reinstall the grille. Two tabs here are going to slide into the bumper there and this clips along the edge. Get those started, and then push it into place. It'll click in. Fog light is replaced.

Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.

Tools needed for replacement:

    Star Drivers & Sockets

  • T25 Driver

2009 - 2011  Audi  S6
2010 - 2012  Audi  S4
2009 - 2016  Audi  Q5
2009 - 2011  Audi  A6
2013 - 2016  Audi  Allroad
2008 - 2012  Audi  A4
2008 - 2012  Audi  A4 Quattro
2009 - 2011  Audi  A6 Quattro
2014 - 2017  Audi  SQ5
Search Videos
Go To Top

Same Day Shipping

Need your part faster? Choose expedited shipping at checkout.

Guaranteed To Fit

Highest quality, direct fit replacement auto parts enforced to the strictest product standards.

USA Customer Support

Exceeding customers' expectations, our team of passionate auto enthusiasts are here to help.

Instructional Video Library

Thousands of how-to auto repair videos to guide you step-by-step through your repair.

Loading...