How to Replace Fog Light Lens 2014-19 Toyota Tundra
Created on: 2018-04-03
How to install, repair, fix, change, or replace a broken, damaged, burned out, cracked, faded, cloudy or chipped fog light on 14 Toyota Tundra.
-
step 1 :Removing the Fog Light Housing
- Pry the fog light out with a plastic prying tool
- Disconnect the brown clip on the wiring harness
- Disconnect the wiring harness
- Remove the Phillips screw from the fog light bracket
-
step 2 :Installing the Fog Light Housing
- Press the light to the bracket
- Tighten the Phillips screw to the bracket
- Connect the wiring harness
- Clip the wiring harness in
- Press the fog light on
Tools needed
-
Flat Blade Screwdriver
Phillips Head Screwdriver
Trim Tool Set
Hi, I’m Mike from 1A Auto. We’ve been selling auto parts for over 30 years!
Remove the fog light bulb. To remove the fog light housing and get to the bulb, use our plastic prying tool. You can get these from 1aauto.com. There's a tab on the top and bottom. You'll start with the top one, pry it down, and then pop it right out. It's only going to come so far because the harness.
So there's a brown connector in there that's holding the harness in to the steel support in the back. And what you're going to have to do is reach in there and squeeze the two tabs and push the connector, push the clip out and then you'll get a lot more wire to come out with you. Reach my hand in here. It's a tight fit, squeeze it by and then with my fingertips I'm going to push the tabs in and push that clip out. I'm going to have to push in on the housing to give the harness just a little bit of give. And then really push that thing through. But you don't want to rip your harness trying to get the bulb out.
Once you get it squeezed together and started, you can reach a long screwdriver in there and kind of push it out. Now, once you have the headlight to the fog light assembly out and separated, you still can't get the bulb out because that stop is the way. So you have to unplug it from the harness, push it in the lock, just going to push in the lock, pull it off.
The fog light is held into the plastic bezel with one Phillips head screw. You take the Phillips head screwdriver, take it out. Slide it out a there and there's the lens assembly. To reinstall it in the bezel. These two tabs line up in these two notches over here. And it slides down. Put the single screw back in here. Tighten it down. Don't go too tight or we'll crack the plastic. It's ready to be reinstalled in the truck.
You plug the light into the harness. Click the locks in place. I'm going to reach in here and plug that back into where it belongs. Push this into place. It's reinstalled.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
How to Replace Fog Light Lens 2014-17 Subaru Crosstrek
New Fog / Driving Light from 1AAuto.com How to install, repair, fix, change, or replace a broken, damaged, burned out, cracked, faded, cloudy or chipped fog light on 14 Subaru Crosstrek
