How to Replace Fog Light Lens 2005-10 Chrysler 300
Created on: 2017-01-26
If the fog light lens on your 05-10 Chrysler 300 is chipped or cracked, check out this video to learn how you can replace it yourself!
-
step 1 :Removing the Air Dam
- Raise and support the vehicle on jack stands
- Remove the three plastic pins on both sides of the dam
- Remove the bolts along the bottom of the bumper
- Remove the air dam
-
step 2 :Removing the Fog Light
- Disconnect the bulb connector
- Compress the three tabs and push the fog light out of the bumper
-
step 3 :Installing the Fog Light
- Insert the fog light into place
- Click and lock in the tabs
- Connect the bulb
-
step 4 :Installing the Air Dam
- Insert the air dam into place
- Tighten the bolts along the bottom of the bumper
- Press the six pins into the dam
Tools needed
-
Socket Extensions
Ratchet
Hi, I'm Mike from 1AAuto. We've been selling auto parts for over 30 years! We're dedicated to delivering quality auto parts, expert customer service, and fast and free shipping, all backed by our 100% satisfaction guarantee. So visit us at 1AAuto.com, your trusted source for quality auto parts.
In this video, we're going to be working with our 2006 Chrysler 300. We're going to show you how to remove and replace your vehicle's fog lights. This is the actual housing and lens assembly, not just the bulb. Our vehicle has a 300 bumper on it, so it may be a little bit different for your 300 M.
If you like this video please click "Subscribe," we have a ton more information on this and many other vehicles. If you need this part for your car, you can follow the link down in the description over to 1AAuto.com.
Raise and support your vehicle. We're using a lift to make it easier to show you what's going on, but this job can easily be done at home on a jack and jack stands.
In order to remove your fog lights, you'll need to remove the vehicle's belly pan or air dam, which is missing on our vehicle. But to remove it you'll have three plastic pins in each wheel well here, a series of bolts along the bottom of the bumper, you can see the openings for all of them here. Three more in the opposite wheel well, again, part of ours is missing. And then there are four bolts, here, looks like they're 10mm that secure it to the bottom of the vehicle's subframe.
Once that's out of the way, we've removed our wheel and tire and the broken piece of our wheel well to show you what's going on with the fog light, however, you'll be able to reach this right from underneath here with that belly pan out of the way. Lift up on this tab and disconnect the connector for the bulb. Then you have three little hooked tabs here, which will compress and push out of the housing, and simply push the fog light assembly right out of the bumper.
Reinstalling your fog light, this little rounded edge at the top is going to be the one that faces up, so line that up and push your fog light through until all three of those tabs lock into place. Make sure it's in there nice and tight and reconnect your bulb.
You'll then reinstall the belly pan or air dam underneath as long as your vehicle's isn't missing.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
Shop Products
How to Replace Install Fog Driving Lights 2003-06 Chevy Avalanche Buy Quality Parts at 1A Auto
New Fog / Driving Light from 1AAuto.com How to install, repair, fix, change, or replace a broken, damaged, burned out, cracked, faded, cloudy or chipped fog light on 02, 03, 04, 05, 06 Chevy, Avalanche
