Menu

1A Auto Video Library
Our how-to videos have helped repair over 100 million vehicles.

How to Replace Fog Light Bulbs 14-19 Toyota Tundra

Share on:

How to Replace Fog Light Bulbs 14-19 Toyota Tundra

Created on: 2018-04-03

How to replace a broken, damaged or burnt out fog light bulb to the 14 Toyota Tundra.

  1. step 1 :Removing the Fog Light Housing
    • Pry the fog light out with a plastic prying tool
    • Disconnect the brown clip on the wiring harness
    • Disconnect the wiring harness
    • Remove the Phillips screw from the fog light bracket
  2. step 2 :Removing the Fog Light Bulb
    • Turn the H16 bulb counterclockwise to unlock it
  3. step 3 :Installing the Fog Light Bulb
    • Line up the slots on the fog light with the tabs on the bulb
    • Turn the bulb clockwise
  4. step 4 :Installing the Fog Light Housing
    • Press the light to the bracket
    • Tighten the Phillips screw to the bracket
    • Connect the wiring harness
    • Clip the wiring harness in
    • Press the fog light on

Tools needed for replacement

  • Screwdrivers & Related

    Flat Blade Screwdriver

    Phillips Head Screwdriver

  • Specialty Tools

    Trim Tool Set

Installation Video
Watch video

Hi, I’m Mike from 1A Auto. We’ve been selling auto parts for over 30 years!

Remove the fog light bulb. To remove the fog light housing and get to the bulb, use our plastic prying tool. You can get these from 1aauto.com. There's a tab on the top and bottom. You'll start with the top one, pry it down, and then pop it right out. It's only going to come so far because the harness.

So there's a brown connector in there that's holding the harness in to the steel support in the back. And what you're going to have to do is reach in there and squeeze the two tabs and push the connector, push the clip out and then you'll get a lot more wire to come out with you. Reach my hand in here. It's a tight fit, squeeze it by and then with my fingertips I'm going to push the tabs in and push that clip out. I'm going to have to push in on the housing to give the harness just a little bit of give. And then really push that thing through. But you don't want to rip your harness trying to get the bulb out.

Once you get it squeezed together and started, you can reach a long screwdriver in there and kind of push it out. Now, once you have the headlight to the fog light assembly out and separated, you still can't get the bulb out because that stop is the way. So you have to unplug it from the harness, push it in the lock, just going to push in the lock, pull it off.

So, it's an H16 bulb. Turn it counterclockwise to unlock it, pull it out. This is not a bulb you want to touch with your bare fingers, it will reduce the life of the bulb. Put it back in place. It is keyed. There's wider tabs and narrow tabs, they line up correspondingly.

Line up the wider tab, turn it clockwise to lock it. Plug the light into the harness, click when it locks in place. I'm going to reach in here and plug that back into where it belongs. Push this into place. It's reinstalled.

Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.

Tools needed for replacement:

    Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Specialty Tools

  • Trim Tool Set


Search Videos
Go To Top

Same Day Shipping

Need your part faster? Choose expedited shipping at checkout.

Guaranteed To Fit

Highest quality, direct fit replacement auto parts enforced to the strictest product standards.

USA Customer Support

Exceeding customers' expectations, our team of passionate auto enthusiasts are here to help.

Instructional Video Library

Thousands of how-to auto repair videos to guide you step-by-step through your repair.

Loading...